Miele FN 14827 S Operating And Installation Instructions page 49

^ Then separate retaining plate f from
cover e by pushing it slightly to the
left. Then pull the cover forwards and
off.
^ Rotate retaining plate f by 180°.
^ Then fit cover e from the front over
retaining plate f, and slide it over to
the right. The writing must be visible.
^ Remove cover g, then rotate it by
180° and fit it on the opposite side.
^ Then fit cover e together with
retaining plate f on the opposite
side.
^ Remove cap h from the bearing
bush in the door and refit on the
opposite side.
Changing the door hinging
49