Specifications; Ec Declaration Of Conformity - Makita DDF481 Instruction Manual

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Indicator lamps
3-2. Check button
4-1. LED display
5-1. Switch trigger
6-1. Lamp

SPECIFICATIONS

Capacities
-1
No load speed (min
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for drilling and screw driving in
wood, metal and plastic.
Noise
The typical A-weighted
according to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode: drilling into metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test method
and may be used for comparing one tool with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
Explanation of general view
7-1. Reversing switch lever
8-1. Speed change lever
9-1. Action mode changing ring
9-2. Graduation
9-3. Arrow
10-1. Adjusting ring
10-2. Arrow
11-1. Protrusion
11-2. Groove
Model
Drilling into steel
Drilling into wood
Fastening wood screw
Fastening machine screw
High (2)
)
Low (1)
Overall length
Net weight
Rated voltage
noise level determined
) : 73 dB (A)
pA
value (tri-axial vector
2
) : 2.5 m/s or less
h,D
2
ENE034-1
WARNING:
The vibration emission during actual use of the power
•
tool can differ from the declared emission value
depending on the ways in which the tool is used.
ENG905-1
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only

EC Declaration of Conformity

ENG900-1
Makita declares that the following Machine(s):
sum)
Designation of Machine:
Cordless Driver Drill
Model No./ Type: DDF481
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
ENG901-1
standard or standardized documents:
EN60745
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
3
11-3. Arm
11-4. Grip pole
11-5. Side grip
12-1. Sleeve
13-1. Bit holder
13-2. Bit
14-1. Groove
14-2. Hook
14-3. Screw
DDF481
13 mm
76 mm
10 mm x 90 mm
6 mm
0 - 2,100
0 - 550
205 mm
2.6 kg
D.C. 18 V
ENH101-18