TIMED CYCLES –
Will run the dryer for the specified time on the control. Settings shown are default settings for that cycle.
Items to dry:
Small loads and
sportswear (2 to
STEAM CYCLE –
Designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.
Settings shown are default settings for that cycle. Not all settings and options are available on each cycle.
Items to dry:
Select a drying temperature based on the fabrics in your load.
If you are unsure of the temperature to select for a load, select
the lower setting rather than the higher setting.
If your dryer has multiple heat settings:
A High heat setting may be used for drying heavyweight
items such as towels and work clothes.
A Medium to Medium High heat setting may be used
for drying medium-weight items such as sheets, blouses,
dresses, underwear, permanent press fabrics, and some
CYCLE GUIDE – TIMED CYCLES
CYCLE GUIDE – STEAM CYCLE
Setting the Dry Temp
Select a drying temperature based on the fabrics in your
load. If you are unsure of the temperature to select for a
load, select the lower setting rather than the higher setting.
Use this cycle to quickly refresh an item or remove light
wrinkles. The load is cooled slowly to reduce wrinkling and
make it easier to handle.
For small loads of 2-3 items.
Use to smooth out wrinkles and reduce
odors from loads consisting of 1 to 9
dry items of wrinkle-free cotton, cotton-
polyester blend, common knits, and
A Low heat setting may be used for drying lightweight
items such as lingerie.
Use an Air (no heat) setting for foam, rubber, plastic,
or heat-sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures
for various loads, refer to the care label directions.