Download  Print this page

Niles VCS HUB8 Installation And Operation Manual

Niles audio volume control distribution hub installation and operation guide vcs hub8
Hide thumbs
   

Advertisement

Niles Audio Corporation
www.nilesaudio.com
©2003 Niles Audio Corporation. All rights reserved. Niles, the Niles logo, and Blending Technology and Architecture are reg-
istered trademarks of Niles Audio Corporation. Decora is a registered trademark of Leviton Manufacturing. All other trademarks
12331 S.W. 130 Street
are the property of their respective owners. Some of Niles products (or components thereof) are manufactured under one or
Miami, Florida 33186
more U.S. Patents, foreign equivalents and/or pending patents (see product for details). Because we constantly strive to improve
Tel: (305) 238-4373
our products, Niles reserves the right to change product specifications, descriptions, and prices without notice. The technical
and other specifications of information contained herein is not intended to set forth all technical and other specifications of Niles
Fax: (305) 238-0185
products. Additional information can be obtained at www.nilesaudio.com or by calling Niles at 1-800-289-4434. Printed in
China 7/03 DS00312BCN
I N S T A L L A T I O N & O P E R A T I O N G U I D E
VCS HUB8
VCS HUB8
Volume Control Distribution Hub
B
H
F
L E N D I N G
I G H
I D E L I T Y
A N D
A
®
R C H I T E C T U R E

Advertisement

Table of Contents
loading

  Related Manuals for Niles VCS HUB8

  Summary of Contents for Niles VCS HUB8

  • Page 1 Niles Audio Corporation www.nilesaudio.com ©2003 Niles Audio Corporation. All rights reserved. Niles, the Niles logo, and Blending Technology and Architecture are reg- istered trademarks of Niles Audio Corporation. Decora is a registered trademark of Leviton Manufacturing. All other trademarks 12331 S.W. 130 Street are the property of their respective owners.
  • Page 2 I S T R I B U T I O N VCS HUB8 INTRODUCTION The VCS HUB8 is a speaker distribution hub that mounts in a structured-wiring cabinet or on a wall. It connects between the speaker-level output of an amplifier or receiver and the Niles TABLE OF CONTENTS volume controls that adjust the sound level of your speakers.
  • Page 3 Alternatively, you can mount it on a wall, a basement floor joist, or some other unobtrusive location. INSTALLATION 1. Run all necessary wiring to the VCS HUB8. Label the wires for future reference. 2. Secure the VCS HUB8 in a suitable location. In a structured- wiring cabinet, use the convenient snap-in “Christmas Tree”...
  • Page 4 NOTE: Maintain proper phasing. Connect the positive termi- nals on the VCS HUB8 to the positive terminals on the ampli- fier or receiver, and on the volume controls. Connect the neg- ative terminals on the VCS HUB8 to the negative terminals on the amplifier or receiver, and on the volume controls.