Running Belt Adjustment - Reebok I Run SE User Manual

Running belt adjustment


This information forms part of the self maintenance and must be carried out periodically by the user*
Proper maintenance is very important to ensure your treadmill is always in top working condition.
Improper maintenance could cause damage or shorten the life of your treadmill and exceed the
LIMITED WARRANTY coverage.
IMPORTANT: Never use abrasives or solvents to clean the treadmill. To prevent damage to the
computer, keep liquids away and keep it out of direct sunlight. Inspect and tighten all parts of the
treadmill regularly. Replace any worn parts immediately.

Belt Adjustment
The running belt has been adjusted properly by the factory. However transportation, uneven flooring
or other unpredicted reasons could cause the belt to shift off centre resulting in the belt rubbing with
the plastic side rail or end caps and possibly causing damage. To adjust the belt back to its proper
position please follow the directions below:
If the belt has only moved by 1-2mm this will not affect the operation of your treadmill
1. If your belt tends to walk to the right, simply adjust the left belt tension bolt by turning it 1/4 turn
counter clockwise. Follow with a test.
2. If your belt tends to walk to the left, rotate the left tension bolt clockwise 1/4 turn at a time, and
follow with a test. If the belt continues to walk to the left, simply adjust the right tension bolt
counter clockwise.
3. If your belt appears to be loose, simply tighten both bolts evenly 1/4turn. If it appears tight,
simply loosen both bolts evenly 1/4 turn.
WARNING! Do not over tighten rollers! This will cause premature roller bearing failure!