Changing A Power-On Or Setup Password; Deleting A Power-On Or Setup Password - HP Z1 G2 Maintenance And Service Manual

Changing a power-on or setup password

To change a power-on or setup password:
1. Restart the computer.
2. To change the power-on password, go to step 4.
3. To change the setup password, as soon as the computer is turned on, repeatedly press the
you enter Computer Setup (F10) Utility.
If you do not press
press
4. When the key icon appears, enter the current password, a slash (/) or alternative delimiter character, the
new password, another slash (/) or alternative delimiter character, and the new password again as
shown:
current password/new password/new password
For information about the alternative delimiter characters, see
on page
Type carefully. For security reasons, the characters you enter do not appear on the screen.
5. Press Enter.
The new password takes effect the next time you turn on the computer.
The power-on and setup passwords can also be changed using the Security options in Computer Setup (F10)
Utility.

Deleting a power-on or setup password

To delete a power-on or setup password:
1. Turn on or restart the computer.
2. Choose from the following:
To delete the power-on password, go to step 4.
●
● To delete the setup password, as soon as the computer is turned on, press and hold
enter Computer Setup (F10) Utility. Press
If you do not press F10 at the appropriate time, you must restart the computer and then press and
hold F10 again to access the utility.
Use the appropriate operating system shutdown process.
3. When the key icon appears, enter the current password followed by a slash (/) or alternative delimiter
character: current password/
For information about the alternative delimiter characters see the following section.
4. Press
32 Chapter 2 System management
F10 at the appropriate time, you must restart the computer, and then repeatedly
F10 to access the utility.
33.
Enter.
National keyboard delimiter characters
Enter to bypass the title screen, if necessary.
F10 key until
F10 until you