Table of Contents
Advertisement
Available languages
Available languages
English
42
Technical Data
Model: ............................................................................PW 5653 BT
Power supply: ..................4 Batteries 1.5 V Type “AAA” / “R03”
Net weight of device .............................................approx. 1.80 kg
Memory capacity: .............................................................................9
Mass alignment: ..............from 60 to 240 cm (2‘00“ – 7‘10“ ft:in)
Age: .................................................................... from 10 to 99 years
Minimum weight: ........................from 5.0 kg (11.0 lb / 0:11 st:lb)
Maximum weight: .........................150 kg (330.69 lb / 23:62 st:lb)
Weight measurement unit: .. 100 g (0.2 lb / ¼ st:lb) increments
Body fat measurement unit: ...................................................0.1 %
Body fluid graduation: ............................................................0.1 %
Recommended operating environment:
Temperature ................................... 0°C - 40°C / 32°F - 104°F
Relative air humidity: ...................................................... < 85%
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.
Information about the Analysis Scale
WARNING:
Do not use the scales if you use a pacemaker or another
medical implant with electronic components. The function
of the implant may be impaired by the measurement.
The main principle of this device is based on the measure-
ment of the electric impedance within the human body. In
order to determine the actual body data, the device leads a
weak, unnoticeable electric signal through your body.
The signal is generally safe! However, please read our special
safety instructions!
The method of measurement is referred to as “bioelectric
impedance analysis” (BIA), a factor which is based on the re-
lationship between body weight and associated body water
percentages as well as on other biological data (age, gender,
body weight).
Information on Bluetooth
Bluetooth is a technology for remote wireless connection
of devices over a short distance. Devices with Bluetooth
Standard transmit in the ISM-Band (Industrial, Scientific and
Medical) between 2.402 and 2.480 GHz. Interference may
be caused e.g. by WLAN networks, DAB radios, cordless
phones, or microwave ovens that operate in the same fre-
quency range.
These scales offer you the possibility of sending the calculat-
ed data via Bluetooth to your smartphone or tablet PC. More
information can be found in the next section (Information on
the App “Smart Scale”).
Due to the many different device manufacturers, models, and
software versions, full functionality cannot be guaranteed.
Information on the App “Smart Scale”
You can download the free app via the Apple Store or the
Google Play Store.
NOTE:
Depending on the provider, there may be costs involved in
downloading the app.
The link to download the app can be found on our internet
page:
http://www.etv.de/products/de/Personal-Care/
Personenwaage/AEG-PW-5653-BT.html
System requirement for use of the app
• iOs 6.0 or higher + Bluetooth 4.0 or higher
• Android 4.3 or higher + Bluetooth 4.0 or higher
Initial use with the app
Before you use the scales with the app, you must pair the de-
vices. To do so, refer to the user manual for your smartphone
or tablet PC (hereinafter known as “device”).
1. Activate Bluetooth in the settings of your device.
2. Install the app “Smart Scale” from the corresponding
App Store.
3. Switch on the scales by gently exerting pressure on the
weighing surface with your foot.
4. Start the app. Establish a connection to the scales in the
app menu “Settings”.
5. Enter your user details in the app in “User”.
6. Perform the measurement as described in the section,
“Use / Measurement and Analysis”.
Use
NOTE:
• The buttons are touch buttons. Gently touch the but-
tons with a finger to execute the function.
• The scales are factory set with the units “kg” and “cm”.
To change the settings to “lb” or “st:lb” as well as “
“,
proceed as follows:
- Quick Links:
- Informationen zur App „Smart Scale
Hide quick links:
Advertisement
Chapters
Table of Contents
