Product Specifications; Product Description; Key Features - HP C2488A Technical Reference Manual

Table of Contents

Advertisement

1
Product Specifications
Product Description
The HP C2486A/88A/90A single-ended and differential disk drives are reliable, low cost,
high capacity, high performance, random access mass storage devices. Each product utilizes
sputtered thin-film 3.5-inch (95 mm) disks as storage media. The disk drive electrical interface
is compatible with the industry standard Small Computer System Interface (SCSI-2). Figure
1-1 shows the major components of the disk drive.
These drives incorporate an advanced Digital Signal Processor (DSP) hybrid servo design that
provides the flexibility and performance of a dedicated servo system and the dynamic head
alignment of an embedded servo system. High capacity and fast average transfer rates are
achieved with Multiple Zone Recording.
The product specifications are listed in the following tables:
Capacities ............................................ .- .......................... Table 1-1
Operating Specifications ......................................................... Table 1-2
DC Power Characteristics ........................................................ Table 1-3
Environmental Requirements .................................................... Table 1-4
Key Features
• High reliability (500,000 hours MTBF).
• Synchronous data transfer rate of up to 20 megabytes per second.
• Digital Signal Processor (DSP) hybrid servo sytem.
• High performance HP-designed balanced actuator.
• Industry standard 3.5-inch form factor and voltage requirements.
• Fast and Wide Embedded SCSI-2 controller.
• Powerful HP-designed Reed-Solomon ECC.
DRAFT
Product Specifications
1·1
1/18/93 09:58

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

C2486aC2490a

Table of Contents