Customizing The Display Panel Or An External Monitor - HP Z1 G2 User Manual

Hide thumbs Also See for Z1 G2:

Table of Contents

DisplayPort

VGA

DVI

Dual-Link DVI

HDMI

Connect the DisplayPort end of the cable/adapter to the DisplayPort connector on the back of the

workstation.

Connect the other end of the cable to the external monitor.

Turn on the monitor. If the workstation is running Windows and a graphics driver is installed, the

workstation automatically detects the external monitor and uses it as a display.

Customizing the display panel or an external monitor

You can manually select or change the monitor refresh rates, screen resolution, color settings, font sizes,

and power management settings of the workstation's display panel or external monitor. Use either the

control panel of the graphics processing unit (MXM card or integrated graphics) or select the Windows

Control Panel > Display options.

For more information about customizing your external monitor, refer to the documentation included with the

monitor.

Chapter 3 Setting up and using the workstation

Monitor Interface

DisplayPort cable

DisplayPort to VGA adapter with VGA cable

DisplayPort to DVI adapter with DVI-D cable

DisplayPort to DLDVI adapter with Dual-Link cable

DisplayPort to HDMI adapter with HDMI cable

Required connection

Table of Contents