Hoses And Fittings; Hose Connections - Greenlee fairmont H8508 Instruction Manual

Hoses and Fittings

Installation and Maintenance
Refer to publication 999 3032.3, SAE J1273
(Hose and Hose Assemblies).
Replacement
Refer to a Fairmont catalog or publication 999 1032.2,
Low Pressure Quick Couplers, Adapters, and Hoses.
Do not disconnect tool, hoses, or fittings while the
power source is running or if the hydraulic fluid is
hot. Hot hydraulic fluid could cause serious burns.
Greenlee / A Textron Company
H8508 Hydraulic Impact Wrench

Hose Connections

Connecting Hoses
1. Move the flow lever on the hydraulic power source to
the off position.
2. Stop the hydraulic power source.
3. Connect the return hose to the return port on the
hydraulic power source, and then to the return port
on the tool.
4. Connect the pressure hose to the pressure port on
the tool, and then to the pressure port on the
hydraulic power source.
Disconnecting Hoses
1. Move the flow lever on the hydraulic power source to
the off position.
2. Stop the hydraulic power source.
3. Disconnect the pressure hose from the hydraulic
power source, and then from the tool.
4. Disconnect the return hose from the tool, and then
from the hydraulic power source.
5. Install dust caps over the ports to prevent
contamination.
7
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070