Advanced Function; Settings; Function Settings - Pioneer DEH-X8700BH Owner's Manual

Advanced Function

Using tag information
When [HD Radio], [Radio], [iPod], [SiriusXM] is selected as a source, you can store the tag
information about the song currently being played and transfer it to the connected iPod
or create a new station based on the tag information stored.
1
When TAG is indicated in the display, press and hold
The tag menu appears.
NOTE
If the Pandora source is not available, the tag menu will not be displayed and tag information will
be stored on the unit.
2
Turn the M.C. dial to select one of the following, then press to confirm.
Menu Item
Station
[Track], [Artist]
Tagging*
* When [Radio] or [iPod] is selected as a source, [Tagging] menu is not displayed.
16
En
/DISP.
Description
Create a new Pandora station based on the track
or artist.
1 Turn the M.C. dial to select [Track] or [Artist],
then press to confirm.
2 Press
(list), then turn the M.C. dial to select
the desired station.
A new station is created.
Store the tag information to this unit.
The tag information is transferred to your iPod
automatically when the iPod is connected to the
USB port (page 21).

Settings

You can adjust various settings in the main menu.
1
Press the M.C. dial to display the main menu.
2
Turn the M.C. dial to select one of the categories below, then press to confirm.
• FUNCTION settings (page 16)
• AUDIO settings (page 18)
• ENTERTAINMENT settings (page 19)
• SYSTEM settings (page 19)
• ILLUMINATION settings (page 20)
• MIXTRAX settings (page 20)
3
Turn the M.C. dial to select the options, then press to confirm.

FUNCTION settings

The menu items vary according to the source.
is only available for DEH-X8700BH.
is only available for DEH-X8700BS.
Menu Item
BSM
Local
FM: [Local OFF], [Level 1], [Level
2], [Level 3], [Level 4]
AM: [Local OFF], [Level 1], [Level
2]
Tuning Mode
[Manual], [Preset]
Seek mode*
[Seek HD], [Seek ALL]
Description
Store the six strongest stations on the preset
channels automatically.
Restrict the tuning station according to the
signal strength.
Assign LEVER to seek the stations one by one
(manual tuning) or select a station from the
preset channels.
Change seek tuning setting between digital
station seek ([Seek HD]) and all station seek
([Seek ALL]) depending on the reception status.