Changing the basic
Switching off without storing To exit the basic setting, switch off the grill with the
Care and cleaning
Draining the water
The grill must be switched off.
Switch on the grill.
Within the next 10 seconds, touch the
for 4 seconds.
symbol appears on the left-hand display
Set the desired value on the control panel.
The setting is stored.
main switch. The changes of the settings will not
Do not use high-pressure or steam jet cleaning
Caution, risk of burns! Wait until the residual heat
display has gone out before cleaning the grill.
Clean the grill after every use. Burnt in residues may
be difficult to remove.
In the event that the water is still hot when drained,
add some cold water to the container to cool it!
To drain the water, place a heat-resistant container
beneath the drain valve. Open the drain tap by
turning the lever down by 90°. Then close the tap by
turning the lever fully up.
appears on the left-hand
on the right-hand display.
symbol repeatedly until the desired
symbol for 4 seconds.