Kenwood IH470 series Instructions Manual page 3

l
Do not scratch the hob plate with sharp
objects.
l
Don't use the hob plate as a worksurface.
l
Never use the hob plate for storage.
l
Do not use the induction hob if the hob
plate is broken or cracked in anyway.
l
Do not put hot or sharp implements or
pans onto the controls.
l
Never put paper, aluminium foil, cloth,
plastic materials or other unrelated objects
on the hob plate when the induction hob is
in use or is hot. Foil used to cover items
during cooking should not be allowed to
come in direct contact with the hob plate.
l
For safety, never leave the handle of your
pan sticking out over the worksurface.
l
Make sure the underside of the cooking
pan and the hob plate are clear from water,
grease or other dirt before cooking.
l
Do not use pans with rough bases as
these may scratch the hob plate.
l
Do not allow the air entry or air vents to be
covered or blocked in any way. Always
ensure that there is adequate ventilation
around the induction hob during operation.
l
The induction hob should not be used near
or below curtains and other compustible
materials.
l
Never unplug the induction hob during
operation before switching it off first.
l
Never use the appliance on a gas stove or
on stainless steel or iron worktops/
surfaces.
l
Do not place this appliance on or near a
naked flame, hot plate or in a heated oven.
l
To not use this appliance as a hot plate.
3