Using The Flash - Nikon Coolpix S50c User Manual

Nikon digital camera user's manual
Hide thumbs Also See for Coolpix S50c:
Table of Contents

Advertisement

Using the Flash

The flash has a range of 0.3–3.5 m (1–11.4 ft.) when the camera is zoomed
out all the way. With maximum optical zoom applied, the range is 0.3–3 m
(1–9.8 ft.) (when [ISO sensitivity] is set to [Auto]). The following flash modes
are available:
Auto (default setting for L (auto) mode)
z
Flash fires automatically when lighting is poor.
Auto with red-eye reduction
A
Reduces "red-eye" in portraits (c 31).
Off
B
Flash will not fire even when lighting is poor.
Fill flash
J
Flash fires when a picture is taken. Use to "fill-in" (illuminate) shadows and
back-lit subjects.
Slow sync
D
Flash illuminates main subject; slow shutter speeds are used to capture back-
ground at night or under dim light.
1
Press J (flash mode).
The flash menu is displayed.
2
Use the rotary multi selector to choose
the desired flash mode and press d.
The icon for the selected flash mode is displayed at
the top of the monitor.
When z (auto) is applied, z is only displayed for
five seconds.
The flash mode applied in L (auto) mode and high-
sensitivity shooting mode is stored in the camera's
memory even after the camera is turned off.
If a setting is not applied by pressing d within five
seconds, the selection will be cancelled.
30
z
z
Flash
L
z
z
M
M
W
W
6 6

Advertisement

Table of Contents
loading

This manual is also suitable for:

25557

Table of Contents