Table of Contents
Advertisement
Quick Links
INDEX
Page Contents
2
Safety Information
3
Unpacking and preparation
4
Installation and start-up
5
Control panel
7
Menu setting
14
Maintenance
21
Optional accessories
22
Technical information
22
Cause and solution of problems
23
Channel functions
SH RPY
INSTRUCTION MANUAL
Congratulations on choosing a Clay Paky product
We thank you for your custom.
Please note that this product, as all the others in the rich Clay
Paky range, has been designed and made with total quality to
ensure excellent performance and best meet your expectations
and requirements.
Carefully read this instruction manual in its entirety and keep it
safe for future reference. It is essential to know the information
and comply with the instructions given in this manual to ensure
the fitting is installed, used and serviced correctly and safely.
CLAY PAKY S.p.A. disclaims all liability for damage to the fitting
or to other property or persons deriving from installation, use and
maintenance that have not been carried out in conformity with this
instruction manual, which must always accompany the fitting.
CLAY PAKY S.p.A. reserves the right to modify the
characteristics stated in this instruction manual at any time and
without prior notice.
1
C61375
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Clay Paky C61375
Summary of Contents for Clay Paky C61375
- Page 1 Menu setting the fitting is installed, used and serviced correctly and safely. CLAY PAKY S.p.A. disclaims all liability for damage to the fitting Maintenance or to other property or persons deriving from installation, use and...
-
Page 2: Safety Information
SAFETY INFORMATION SAFETY INFORMATION IMPORTANT: Clay Paky recommends you carefully read and keep the safety information on this product, also http://www.claypaky.it/en available in digital format at the following link: Ref: [FIS010 – Safety Information Sharpy] INFORMAZIONI DI SICUREZZA IMPORTANTE: Clay Paky raccomanda di leggere accuratamente e conservare le informazioni di sicurezza relative a questo prodotto, sempre reperibili in versione digitale al seguente link: http://www.claypaky.it/en/download... -
Page 3: Unpacking And Preparation
UNPACKING AND PREPARATION Lamp 189W (fitted into projector) 2 x 183102/805 Packing contents - Fig. 1 PAN Mechanism Lock and Release (every 90°) - Fig. 2 TILT Mechanism Lock and Release (every 45°) - Fig. 3 SH RPY... -
Page 4: Installation And Start-Up
INSTALLATION AND START-UP Installing the projector - Fig. 4 WARNING: with the exception of when the projector is positioned on the floor, the safety cable must be fitted. (Cod. 105041/003 available on request). The projector can be installed on the floor resting on special rubber feet, on a truss or on the ceiling or wall. This must be securely fixed to the support structure of the projector and then connected to the fixing point at the centre of the base. -
Page 5: Control Panel
CONTROL PANEL Mains Connecting to the mains supply - Fig. 6 Connecting to the control signal line - Fig. 7 Use a cable conforming to specifications EIA RS-485: 2-pole twisted, shielded, 120Ohm characteristic impedance, 22-24 AWG, low capacity. Do not use microphone cable or other cable with characteristics differing from those specified. - Page 6 Reversal of the display - Fig. 9 To activate this function, press UP and DOWN keys simultaneously while the display is in the rest mode. This status will be memorised and maintained even for the next time it will be switched on. To return to the initial state, repeat the operation all over again. Setting the projector starting address On each projector, the starting address must be set for the control signal (addresses from 1 to 512).
-
Page 7: Menu Setting
MENU SETTING System Set Up Option Lamp Dmx Information Address Errors Safety Channel Fixture Black Out Mode Hours Invert Pan / Tilt Lamp Fixture ID Hours Invert Tilt Ethernet Lamp Interface Swap Strikes Pan-Tilt Encoder System Option Pan-Tilt Version P/T Homing Mode Board Information... -
Page 8: Setup Menu
NOTE: On grey the default options SET UP MENU DMX ADDRESS Set Up Address xxx NOTE: without the DMX signal the Address (XXX) flashing Address Allows you to select the DMX ADDRESS. 1) Press - the current DMX Adress appear on the display. 2) Use the UP and DOWN , RIGHT... -
Page 9: Options Menu
OPTIONS MENU Option Lamp Dmx LAMP DMX Used for enabling lamp remote control channel. 1) Press - the current settings appear on the display (On or Off). 2) Use the UP and DOWN keys to enable (On) or disable (Off) the lamp remote control channel. - Page 10 Fixwheel Color Shortcut Linear Movement Shutter Shutter On Error Dimmer filter type Display Default Reset To Setting Preset Dafault Go Back User Load Preset 1 Preset 1 Save To Preset 1 User Load Preset 2 Preset 2 Save To Preset 2 User Load Preset 3...
-
Page 11: Information Menu
Used for restoring default values on all options menu items and relevant submenus. Option Setting 1) Press , a confirmation message (Are you sure?) appears on the display. 2) Select YES to confirm the selction or NO to keep current setting. OPTION DEFAULT Lamp DMX... -
Page 12: Manual Control
SYSTEM VERSION System Board Revis. Hw.rv. Information Used for displaying the software and hardware version of each board Version CPU brd x.x.x com.dev installed in the projector. 0: PT-3f CPU brd (CPU board) 1: 8-Ch 0: PT-3f (Pan / Tilt board) 1: 8-Ch (8 channel board) BOARD DIAGNOSTIC Board... -
Page 13: Advanced Menu
TEST MENU TEST Pan-Tilt Allows you to check the proper functioning of effects. Test Colour 1) Press to return to the top menu level. Beam Gobo 2) Use the UP and DOWN keys to select the required test. 3) Press to confirm the selection or LEFT to keep current settings. -
Page 14: Maintenance
MAINTENANCE 1/4 Turn 1/4 Turn Locking and releasing Pan and Tilt movements - Refer to the instructions in the UNPACKING AND PREPARATION section. Opening the head covers - Fig. 10. Closing the head covers - Fig. 11. SH RPY... - Page 15 Upper Side Upper Side 1/4 Turn Upper Side Upper Side Upper Side Upper Side Opening and closing lamp compartment - Fig. 12 Lamp change - Fig 13 WARNING: do not touch the lamp’s envelope with bare hands. Should this happen, clean the bulb with a cloth soaked in alcohol and dry it Take the new lamp out of its package and insert in the fitting.
- Page 16 During maintenance and lamp replacement, we recommend you pay close attention to correct anti IR/UV filter support tilt. Incorrect tilt com- promises lamp performance. Lower Side Replacing fixed gobos wheel - Fig. 16 WARNING: Before using personalised gobos wheel contact Clay Paky. SH RPY...
- Page 17 • General cleaning of internal parts. • Restoring lubrication of all parts subject to friction, using lubricants specifically supplied by Clay Paky. • General visual check of the internal components, cabling, mechanical parts, etc.
- Page 18 Upper Side Extraction of the effect modules: Preliminary operations - Fig. 18 SH RPY...
- Page 19 Lower Side Lower Side Lower Side Lower Side Extraction of the effect modules - Fig. 19 IMPORTANT: Grasp the modules using the support structure and not the details which could get damaged. Insertion of the effect modules: Repeat the operations indicated in Fig. 17 and 18 in reverse order. Continue SH RPY...
- Page 20 Battery removal - Fig. 20 This product contains a rechargeable lithium iron tetraphosphate battery. To preserve the environment, please dispose the battery at the end of its life according to the regulation in force. LiFePO4 SH RPY...
-
Page 21: Optional Accessories
OPTIONAL ACCESSORIES Lower Side C61190 Heat screen filter - Fig. 21 An optional filter kit is also available when the SHARPY projector is used in environments that do not meet the minimum allowed distance of 12 metres from illuminated objects; when this kit is assembled, the projector can be used at a minimum distance of 8 metres from illuminated objects. Lower Side C61190 accessory can be placed inside the projector when not in use - Fig. -
Page 22: Technical Information
TECHNICAL INFORMATION Power supplies available • Resolution: 115/230V 50/60Hz - PAN = 2.11° - PAN FINE = 0.008° Input power: - TILT = 0.98° 350VA a 230V 50Hz. - TILT FINE = 0.004° • Accuracy: Total output - Resolution ± 0,15° (Range 0,3°) Max 8000 lumens IP20 protection rating: (12.40") -
Page 23: Channel Functions
CHANNEL FUNCTION NB: To prevent accidental breakage of the effects, which could collide with each other during transport, SHARPY before switching the projector OFF check that all the projector Channels have been excluded (DMX level = 0 bit). CHANNEL MODE CHANNEL STANDARD VECTOR... - Page 24 NOTE: On conclusion of resetting in case of absence of DMX signal, Pan & Tilt move to the "Home" position (Pan 128 bit - Tilt 128 bit ) all the others channels stay at 0 bit. • COLOUR WHEEL - channel 1 •...
- Page 25 • EFFECTS MOVEMENT - channel 7 • PAN - channel 10 Operation with option InvertPan (Tilt conventionally represented at 14% and option Invert Tilt Off) EFFECT 0%-100%: 0.33 sec • FROST - channel 8 Operation with option InvertPan (Tilt conventionally represented at 14% and option Invert Tilt Off) EFFECT FROST INSERTED...
- Page 26 • FUNCTION - channel: 14 • TILT - channel 12 Operation with option Invert Tilt EFFECT (Pan conventionally represented at 0% and option Invert Pan Off) FREE 51-62 LINEAR (Default) DIMMER CURVE FUNCTION 38-50 CONVENTIONAL 25-37 NORMAL PAN-TILT FUNCTION 12-24 FAST (Default) 0-11 UNUSED RANGE...
-
Page 27: Timing Channels
TIMING CHANNELS Timing Channel Channel function Pan - Tilt time Pan - Tilt - (Pan fine - Tilt fine) Colour time Colour wheel Beam time Dimmer - Frost - Prism Gobo time Static Gobo TIME TABLE Seconds Seconds Seconds Seconds Seconds Seconds Full... - Page 28 CLAY PAKY - Via Pastrengo, 3/b - 24068 Seriate (BG) Italy - Tel. +39-035-654311 - Fax +39-035-301876 - www.claypaky.it S.p.A.
Need help?
Do you have a question about the C61375 and is the answer not in the manual?
Questions and answers