Electronic Vr; Af Assist - Nikon Coolpix P50 User Manual

Nikon user manual digital camera coolpix p50
Hide thumbs Also See for Coolpix P50:
Table of Contents

Advertisement

w Electronic VR
Specify the electronic vibration reduction setting for shooting still pictures.
Auto (default setting)
The effects of camera shake and blurred subjects are reduced while pictures are
shot under the following conditions:
• Flash mode is set to W or Y
• Shutter speed is slow
• [Single] is selected for the [Continuous] setting
Off
Electronic vibration reduction is not enabled.
When R is displayed in the monitor with [Auto] specified, the camera applies
vibration reduction to suit shooting conditions (A 6).
B
Note on Electronic VR
• Electronic VR may not work properly immediately after the camera is turned on or reactivated from
standby mode.
• Electronic VR does not work when the exposure time is faster than a certain value.
• Electronic VR is less effective for when pictures are considerably blurred.
• Blurred subjects cannot be compensated.
D
Electronic Vibration Reduction Icons in Playback Mode
The compensated pictures are marked with the R icon in full-frame playback mode. If electronic VR
cannot compensate a blurred picture, the picture is marked with the Q icon in full-frame playback
mode (A 6, 7).
D
Compensating Movies with Electronic VR
Electronic VR can be enabled for movie recording from [Electronic VR] (A 58) in the movie menu
(A 57).
h AF Assist
Enable or disable AF-assist illumination.
Auto (default setting)
AF-assist illumination will be used to assist the focus operation when the subject is
poorly lit. Note that for some scene modes, AF-assist illumination turns off
automatically.
Off
Disable this function. The camera may be unable to focus if lighting is poor.
Basic Camera Setup: The Setup Menu
111

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

25583 - coolpix p50 digital camera

Table of Contents