First Steps; Attach The Camera Strap And Lens Cap; Insert The Battery - Nikon COOLPIX 4300 User Manual

Nikon user guide digital camera coolpix4300
Hide thumbs Also See for COOLPIX 4300:
Table of Contents

Advertisement

First Steps

Step 1—Attach the Camera Strap and Lens Cap
Camera Strap
Lens cap
• Press the tabs on the lens cap to
attach/detach it.
• We recommend attaching the lens cap to the
strap loop with the supplied cord to prevent it
from being misplaced.
Step 2—Insert the Battery
Your camera is powered by a single rechargeable Nikon EN-EL1
lithium-ion battery or a non-rechargeable 2CR5 (DL245) lithium battery
(available separately).
1
Charge the battery
• The EN-EL1 is not fully charged at shipment. A battery charger is provided
with the camera; we recommend that you charge the battery before use.
Instructions for charging the battery may be found in the instruction manual
included with the charger.
Read Battery Warnings
Read and follow all warnings and instructions supplied by the battery
manufacturer.
16
• Attach the strap as shown.
2
Turn the camera off
3
Open the battery-chamber cover
• Pressing the battery-chamber cover latch
the battery-chamber cover out
4

Insert the battery

EN-EL1
2CR5 (DL245)
• Insert a fully charged EN-EL1 or new 2CR5 (DL245) battery as shown in the
label on the underside of the battery-chamber cover.
5
Close the battery-chamber cover
• Close the battery chamber cover
the closed position
dislodged during operation, be sure that the battery
chamber cover is properly latched.
, slide
and flip it open
.
and slide it to
. To prevent the battery being
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Coolpix s4300

Table of Contents