Nikon COOLPIX 4300 User Manual page 72

Display Problem
WARNING!! Error accessing memory
This CF card cannot card.
be read
MEMORY CARD
IS NOT Memory card has not
FORMATTED been formatted for use in
COOLPIX4300.
Format
No
Error occurs during
shooting:
Insufficient memory to
record further pictures at
current settings.
OUT OF MEMORY Error appears when you
try to transfer images to
computer:
Not enough space on
memory card to record
information needed for
transfer.
• Memory card has not
been formatted for use
in COOLPIX4300.
• Error encountered while
IMAGE CANNOT BE saving picture.
SAVED • Camera has run out of
folder or file numbers.
• Small picture cannot be
created with the image.
memory card contains
CARD CONTAINS
no pictures.
NO IMAGES
142
Solution Page
Use approved memory
133
card.
Press on Multi selector
to highlight "Format" and
press to format card, 90
or turn camera off and
replace card.
• Reduce image quality 81,
or size. 82
• Delete pictures. 118
• Insert new card. 18
Disconnect camera,
delete unwanted pictures 118
and try again.
• Reformat memory card. 90
• Select "Off" or "Reset" in 89
"Seq. Numbers" menu.
• Select image other than 60
small picture or movie.
• Camera in review mode: 30
half-press shutter
release button to return
to shooting mode.
• Mode dial set to 15
(playback mode): turn
mode dial to another
setting.
Display Problem
ALL IMAGES ARE All images in current
HIDDEN folder are hidden.
File created by
FILE CONTAINS NO
computer or different
IMAGE DATA
make of camera.
THE FOLDER
Folder contains hidden
CANNOT BE
or protected pictures.
DELETED
USB cable
disconnected or
memory card removed
while pictures are being
transferred to
computer.
COMMUNICATIONS
Protocol selected in
ERROR
USB menu does not
match that used by
computer operating
system, causing error
when TRANSFER
button is pressed to
transfer pictures.
No images marked with
NO IMAGES ARE icon when
MARKED FOR TRANSFER button
TRANSFER pressed to transfer
images to computer.
Error has occurred
TRANSFER ERROR
during image transfer.
Error has occurred in
SYSTEM ERROR camera's internal
circuitry.
Solution Page
Select another folder or
use "Hide Image" to 121,
change hidden status of 125
images in current folder.
• Delete file. 118
• Reformat memory card. 90
Folder can only be deleted
if all images it contains are
121
neither hidden nor
protected pictures.
If error message displayed
in computer monitor, click
OK to exit Nikon View.
66
Turn camera off, reconnect
cable or replace memory
card, then turn camera on.
Turn camera off and
disconnect USB cable,
then change USB selection
in camera setup menu and
93
reconnect camera. If error
reoccurs, use Nikon View
button to transfer
pictures.
Disconnect camera and 32,
mark at least one image for 57,
transfer before connecting 58,
camera again. 128
Check that the camera is
properly connected and
67
that the battery is fully
charged.
Turn camera off, unplug
optional AC adapter (if
using), remove and re-
17,
insert battery. If error
18
persists, contact retailer or
Nikon representative.
143