Connecting The Camera To A Printer - Nikon Coolpix S3100 User Manual

Connecting to a Printer

Connecting the Camera to a Printer

1
Turn off the camera.
2
Turn on the printer.
Check printer settings.
3
Connect the camera to the printer using the supplied USB cable.
Be sure that connectors are properly oriented. Do not attempt to insert connectors at an
angle, and do not use force when connecting or disconnecting the USB cable.
4
The camera is automatically turned on.
When properly connected, the PictBridge startup screen
( 1 ) will be displayed in the camera monitor, followed by
the Print selection screen ( 2 ).
1
B
If the PictBridge Screen is not Displayed
Turn off the camera and disconnect the USB cable. Set Charge by computer (A 150) in the
camera's setup menu to Off, then connect the camera again.
130
2
Print selection
1 5 / 0 5
2 0 1 1
4