Setup; Before Starting (Initial Settings); Home Menu - Samsung BD-C6900 User Manual

Hide thumbs Also See for BD-C6900:
Table of Contents

Advertisement

Setup

Before Starting (Initial Settings)

1.
Turn on your TV after connecting the product.
(When the product is connected to TV for the
first time, the product will turn on automatically
and display the Initial Settings screen.)
Initial Settings I On-Screen Language
Select a language for the on-screen displays.
English
中文
2.
Press the ▲▼ buttons to select the desired
language, then press the 确认 button.
3.
Press the 确认 button to select Start.
Initial Settings
TV Aspect and Network will be set.
Each setting may be changed later under "Settings"
Start
4.
Press the ▲▼ buttons to select the desired
TV aspect ratio, then press the 确认 button.
(See page 32)
Initial Settings I Network
Network Setting is needed to use various Internet services.
Choose the primary method for connecting to network.
Wired : Set the network connection using Ethernet cable. Please make sure that the
Ethernet cable is connected.
Wired
Wireless
Previous
a
> Move
" Select
Previous
" Select
a
PBC (WPS)
Skip
< Move
" Select
d
5.
Press the ◄► buttons to select the desired
Network Settings : Wired, Wireless or PBC
(WPS), and then press the 确认 button. If you
do not know your Network Settings, press
the 蓝色 (D) button on your remote instead
to skip Network Settings here, finish the Initial
Settings, and go to the Home menu.
If you selected a Network Setting, go to
pages 38~42 for more information about the
Network settings. When done, go to Step 6.
6.
Press the OK button.
The Home menu is displayed. For more
information about the Home menu, please
see page 30.

Home Menu

Please activate Internet@TV service
to enjoy a variety of Internet Services.
No Disc
Change Device
a
NOTE
When the product is connected to a TV for the first
time, product will turn on automatically.
This is not malfunction.
The Home menu will not appear if you do not
configure the initial settings except as noted below.
If you press the 蓝色 (D) button during the network
setup, you can access the Home menu even if the
network setup is not completed yet.
When you return to the Home menu, the full screen
mode is cancelled automatically.
If you want to display the Initial Setting screen again
to make changes, press the 停止 (
on the front panel of the product for more than 5
seconds with no disc inserted.
You Tube
internet radio
View Devices
Enter
"
d
) button

English

Advertisement

Table of Contents
loading

Table of Contents