Table of Contents
Advertisement
Motion Detection
1.
When the SPECIAL menu is displayed, use the Up or Down OSD controls to access
the MOTION DETECTION menu (see
Figure 22
SPECIAL
CAMERA TITLE OFF
ADJUST
MIRROR
MOTION DET
PRIVACY
SYNC
RESOLUTION
RESET
RETURN
2.
Configure the Motion Detection settings (see
ALARM
Options are ON and OFF. Select whether motion will activate a visible onscreen
alarm.
AREA ON
The area(s) that will be monitored for motion can be set by changing the TOP,
BOTTOM, LEFT and RIGHT values.
a.
Select AREA in the MOTION DET menu and press SET to open the MOTION
AREA menu (see
b.
In this menu, select the motion detection area to be adjusted (from AREA1 to
AREA4) and press SET to open the AREA1~4 menu.
c.
Use the Up, Down, Left and Right OSD controls to change the TOP,
BOTTOM, LEFT and RIGHT values, as needed.
d.
Select RETURN and press SET to save the area.
Figure 23
MOTION AREA
AREA1
AREA2
AREA3
AREA4
RETURN
SPECIAL Menu - MOTION DETECTION Submenu Selection
OFF
OFF
OFF
INT
NORMAL
NO
Figure
23).
MOTION DETECTION AREA Adjustment
ON
ON
ON
ON
Configuring the Camera | 23
Figure
22).
MOTION DET
ALARM
AREA
SENSITIVITY
DISPLAY
HOLD TIME
RETURN
Figure
22) as follows:
AREA1~4 ON
TOP
BOTTOM
LEFT
RIGHT
RETURN
ON
025
OFF
003
25
65
30
80
800-12003V1 - A - 01/2013
Hide quick links:
Advertisement
Table of Contents
