Turning On the Power
1. Connect the power plug
2. Connect the DC output plug
the DC input jack on the main unit.
3. Hold down the
about 2 seconds.
• The power indicator turns on. The player can now
1
2
be used.
Power adapter
• In the standby mode (when the power indicator is lit
red), the power can also be turned on by pressing
the power button
3
3
Hint:
The included AC adapter is compatible with voltages of
100 to 240V, so you can use it on trips overseas.
Note that you need a converter plug (available in stores)
suited for the region in which you are travelling.
25
1
to a power outlet.
of the adapter to
2
button on the main unit for
on the remote control unit.
3
Playback Functions
Loading discs
1.
1
2.
A
3.
2
B
C
A
3
4.
26
Press button
A
to open the player case.
Press button
to release the disc cover
B
lock, the disc cover
will eject up.
C
Set the disc in place and press down on the
disc with your fingers near the center hole. A
click is heard.
NOTE:
Set the disc securely. Failure to set it
•
securely could result in damage.
•
Do not use cracked or warped discs. Doing
so could result in damage.
•
Set single-sided DVDs or CDs with he label
(printed) side facing upwards. For
double-sided DVDs, check the side carefully,
then load the disc securely (until a click is
heard)
•
With CDs or one-sided DVDs, you do not
have to worry about touching the label
(printed) side of the disc with your fingers.
Two-sided DVDs, however, have signals
recorded on both sides, so be careful not to
scratch them when removing them from the
player.
Press down disc cover
until a click is heard.
C
Or further close the player case lock
, a click
A
is also heard.