Removing The Upper Rack(S) - KitchenAid KUDE20FB*0 Technical Education

2013 stainless steel tall tub dishwasher *all colors
Table of Contents

Advertisement

COMPONENT ACCESS
Removing The Upper Rack
(for SatinGlide Max rails)
1. To gain access to the removable tabs on the tracks/rails,
pull the upper rack forward about halfway out of the tub.
2. On one side, press the tab on the track in and pull up the
front end of the rack out of the track. See figures 1 & 2.
3. Then repeat this step on the other side to completely
remove the front end of the rack.
4. Then remove the back end of the rack, by pulling the back
end out with a slightly forward, and then upward motion.
rails)
®
4-12
KitchenAid 2013 Stainless Steel Tall Tub Dishwasher
n

Removing the Upper Rack(s)

Removable Top Rack (for SatinGlide
The removable top rack
allows you to wash larger
items such as pots, roasters,
and cookie sheets in the
bottom rack.
IMPORTANT: Remove
dishes prior to removing the
top rack from the
dishwasher.
To remove the rack:
To gain access to the
removable tabs on the
tracks/rails, pull the upper
rack forward about halfway out of the tub.
On one side, press the tab on the track in and pull up the front end
of the rack out of the track. Then repeat this step on the other side
to completely remove the front end of the rack.
Then remove the back end of the rack, by pulling the back end out
with a slightly forward, and then upward motion.
To replace the rack:
Figure 1
Pull the tracks forward about halfway out of the tub.
Along the sides of the racks are round attachment tabs. Align the
rack's back end attachment tabs with the cutout in the track. Push
down into place.
Pull the tracks completely out, and align the rack's front end
attachment tabs with the cutout in the track. Push down into place.
You will hear a snap when the front end of the rack is secured into
place on each side.
Removable Culinary Tool Rack (3rd level rack)
The removable culinary tool rack
(3rd level rack) allows you to wash
larger items in the upper rack, or
remove both the culinary tool rack
and top rack to wash larger times
Figure 2
in the lower rack. See "Removable
Top Rack" section.
To remove the rack:
1. To access track stops, pull the
rack forward until it stops and
clicks into place.
2. To open track stops, flip the track stop to the outside of the
track.
3. After opening both track stops, slide front wheels up and out
of the slot in track. Continue to pull rack forward in track and
slide the back wheels up and out of the track.
4. Close track stops.
5. Slide rack tracks back into dishwasher.
To replace the rack:
1. Gently pull rack tracks forward in dishwasher until they stop
and click into place.
Removable Top Rack (for SatinGlide
Removing The Upper Rack
Max rails)
®
The removable top rack allows you to wash larger items such as
pots, roasters, and cookie sheets in the bottom rack.
(for SatinGlide rails)
IMPORTANT: Remove dishes prior to removing the top rack from
dishwasher.
1. To gain access to the track stops, pull the upper rack
To remove the rack
forward about halfway out of the tub.
To gain access to the track stops, pull the upper rack forward
2. To open, flip the track stop toward the outside of the tub.
about halfway out of the tub.
After opening both track stops, pull top rack out of the
To open, flip the track stop toward the outside of the tub.
rails. See figure 3.
After opening both track stops, pull top rack out of the rails.
12
Removing the Culinary Tool Rack
(3rd level rack - available on some models)
1. To access track stops, pull the rack forward until it stops
and clicks into place.
2. To open track stops, flip the track stop to the outside of
the track, see figure 4
3. After opening both track stops, slide front wheels up and
out of the slot in track. Continue to pull rack forward in
track and slide the back wheels up and out of the track.
4. Close track stops.
5. Slide rack tracks back into dishwasher.
A. Track stop
B. Track
rails)
®
Figure 3
A
B
Figure 4
and top r
in the low
Top Rack
To remo
1. To ac
rack
clicks
2. To op
track
3. After
of the
slide
4. Close
5. Slide
To repla
1. Gent
and c
2. To op
track
3. Place
track
4. Inser
slots
5. Close
into d

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents