Outline And Features; Warnings And Cautions When Using - Hitachi SA-1000 Operating Instructions Manual

Outline and features

1. General
The SA-1000 is a heavy-duty studio adapter designed for use with the Hitachi SK-HD1000 portable
HDTV television camera. The configuration offers a choice of the VF-L9HD (9-inch LCD viewfinder) for
demanding.
With the use of the SA-1000, the SK-HD1000 portable HDTV television camera can be used in a studio
or field configuration. The SK-HD1000 portable HDTV television camera can be easily installed and
removed from the SA-1000 chassis as required by the user to meet television program production
requirements in studio and field.
2. Features
■ Provide full studio camera facilities with the use of a single interface cable.
■ Enable full studio camera system operation to use monitor select, filter disk selection, viewfinder display and
etc. on the back panel.
■ Improve viewfinder position and optical cable route to operate.
■ Enable to use with the CU-HD1000.
* Always set the VF-L9HD power switch turn on.

Warnings and cautions when using

CAUTION
Do not disassemble or modify
The camera contains
components. Do not open the cover or disturb
switches and controls other than designated.
There is risk of impaired performance and
damage.
Keep foreign object out of interior
Entry of water, metallic or other foreign
materials can cause failure and damage.
Select use and storage locations carefully
Avoid using or storing the equipment in the
following types of
performance and damage can be caused.
Extremely hot or cold locations (exceeding 0 to
40°C), such as in enclosed vehicles.
Subject to strong vibration.
Humid or dusty locations.
precision internal
locations. Impaired
Salt spray or corrosive gases.
Strong electromagnetic fields (e.g., near TV or
radio transmitters).
Where exposed to rain.
When connecting and disconnecting cables,
grasp the connector by the body, not the
attached cable. Cables can be damaged by
pulling on them.
Fuse replacement
Important: Although spare fuses are provided,
the fuse must be replaced only by a qualified
service technician.
In event of difficulty
Disconnect from power and contact the nearest
Hitachi Kokusai Electric service agency.
1