Page 1
OPERATION MANUAL NIGHT VISION SCOPE NZT1-M2 (Camera Adaptable) In USA: 2331 Superior Ave. Cleveland, OH 44114 In Canada: 105 Sparks Ave., Toronto, ON M2H 2S5 NEWCON™ INC. 1996 Printed in Canada...
Page 2
CONTENTS 1- Important Information 2- Overview i) Application and Advantages of NZT1-M2 ii) Warning iii) Precautions 3- Components 4- Specifications 5- Construction 6- Operating Instructions 6.1 Pre-starting procedures 6.2 Testing of operation 6.3 Operation at night 7- Using the NZT1-M2 with Camera...
Page 3
ACCEPTANCE CERTIFICATE NIGHT VISION DEVICE Serial Number _______________________________ Model _NZT-1M2_____________________________ corresponds to technical conditions ADSH 3.807.020 TU and is admitted for use. Date of production -____________________ Place for seal Quality inspector ____________________ (signature) • NEVER disassemble the unit. contains high voltage, which may be hazardous to your health! •...
PLEASE READ CAREFULLY BEFORE USING. 2. OVERVIEW The night vision scope NZT1-M2 is an observational optico-electronic monocular device intended for examining distant objects and orientation at nighttime conditions. The unit utilizes an image intensifier which amplifies available moonlight, starlight or man-made light.
Page 5
NEWCON product for warranty service are your responsibility. Please include a cheque or money order made out to NEWCON OPTIK for the amount of US$7.50 to cover shipping and handling. NEWCON OPTIK may replace any product that has been discontinued or is out of stock, by another current product of comparable value and function.
9. WARRANTY: NEWCON OPTIK warrants this product against defects in material and workmanship for one year from the date of the original date of consumer's purchase, but no more than 18 months from the date of manufacturing.
Repeat the steps of focusing if necessary If the view still does not seem in focus, clean the lenses; they could be foggy or dusty.14 3. COMPONENTS NZT1-M2 is supplied with the following components: NAME QUANTITY NZT1-M2 unit Case Carrying strap...
Page 8
4. SPECIFICATIONS OF NZT1-M2 Magnification, X Field of View, angl.., degrees, not less Lens aperture Dyoptric correction Operating illumination Power supply; Scope AP-7 I/R Illuminator Battery life, hours Dimensions, mm Weight, kg NOTE: As the design is being continuously improved some descriptions may differ from those given above.
Page 9
5. Adjustable Angle Locking Ring 6. Lens Focusing Ring 7. USING THE NZT1-M2 WITH CAMERA To use a camera with the NZT1-M2, use a camera with Pentax Screw type thread. Adapters for most other cameras should be available in your local camera store.
Page 10
At insufficient ambient illumination use the AP-7 Infra/Red illuminator. Attach AP-7 Infra/Red illuminator unit using the mount screw (4) to the tripod socket of the telescope lens NZT, then switch on AP-7 (2). Focusing of the beam is done by rotation of the lens ring (6). The angle of the beam...