Tips About Indicator Panel - Sharp AY-X08BE Operation Manual

Split type
Hide thumbs Also See for AY-X08BE:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
TIPS ABOUT AUTO MODE
In the AUTO mode, the temperature setting and mode are automatically selected according to
the room temperature and outdoor temperature when the unit is turned on.
Modes and Temperature Settings for Models
AH-X08BE/AH-X10BE/AH-X13BE
28
Cool
(24¡C)
29
Dry
Cool
(
)
Room Temp.
(25¡C)
-2¡C
21
indoor temp.
(¡C)
the figures in ( ) are temperature
settings
During operation, if the outdoor temperature changes, the temperature settings will automati-
cally slide as shown in the chart.
MODE CHANGEOVER
During seasons when you need COOLING at daytime and HEATING at night, or if the room
temperature should become extremely higher than the temperature setting, due to supplemen-
tary heating equipment, the mode will automatically switch between HEAT and COOL mode to
keep the comfortable room temperature.

TIPS ABOUT INDICATOR PANEL

The indicator panel will change each time you press
the DISPLAY button in the following manner.
Temperature
Room Temp. Lamp
Indicator
Outdoor Temp. Lamp
POWER MONITOR
When the room temperature or the outdoor temperature is displayed, the POWER MONITOR
will light up in 4 levels (3 levels for DRY mode), to indicate the operation power.
When the air conditioner is operating at maximum power in the COOL (and HEAT for AY-
X08BE/AY-X10BE/AY-X13BE)mode,"Power" will light and "Eco" will turn off on the indicator
panel.
NOTES:
• The displayed temperatures are rough estimates and may vary from the actual temperatures.
• Temperature display ranges
Room temperature: 0°C ~ 40°C (
than 40°C)
Outdoor temperature: -9°C ~ 45°C (
than 45°C)
is displayed during the first minute of operation while the temperatures are being detected.
• Only the room temperature can be displayed when the unit is not in operation.
outdoor
(¡C)
34
temp.
Cool
(26¡C)
(only for models AY-X08BE/AY-X10BE/AY-X13BE)
ECO
The
POWER MONITOR are displayed.
POWER MONITOR
The outdoor temperature and
ECO
POWER MONITOR are displayed.
No display.
is displayed when less than 0°C and
is displayed when less than -9°C and
Modes and Temperature Settings for Models
AY-X08BE/AY-X10BE/AY-X13BE
0
10
18
Fan
29
Heat
Heat
21
(24¡C)
(23¡C)
indoor temp.
(¡C)
the figures in ( ) are temperature settings
DISPLAY
room
temperature
E-9
outdoor
28
34
temp.
(¡C)
Cool
Cool
Cool
(24¡C)
(25¡C)
(26¡C)
Dry
(
Room Temp.
)
-2¡C
Heat
(22¡C)
FULL
POWER
and
when higher
when higher

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ah-x08beAh-x10beAy-x10beAy-x13beAh-x13be

Table of Contents