1. Manuals
  2. Brands
  3. Newcon Optik Manuals
  4. Riflescope
  5. DN482
  6. Operation manual

Newcon Optik DN482 Operation Manual

Night vision riflescope 2+/3 image intensifier tube generation
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Enlarged version
13. ACCEPTANCE CERTIFICATE
Image Intensifier Tube
Resolution, lines/mm
Photocathode sensitivity, integral,
µA/ lm
Light amplification
Image Intensifier Tube Serial Number: _____________
Date of production: __________
Quality Inspector Signature: ____________
NIGHT VISION RIFLE SCOPE
__DN 482
__DN 483
Serial Number_________ corresponds to all technical
specifications and is admitted for use.
Date of production: _____________
Quality Inspector Signature: _____________
Quality assurance seal
NEWCON™ 2003
Printed in Canada
Minimum
Measured
30
400
20,000
Operation Manual
NIGHT VISION RIFLESCOPE
DN482/483
(2+/3 Image Intensifier Tube generation)
In USA: 3310 Prospect Ave. Cleveland, OH 44115
In Canada: 105 Sparks Ave., Toronto, ON M2H 2S5 Canada
Tel: (416) 663-6963 Fax: (416) 663-9065
Email:
NEWCONSALES@NEWCON-OPTIK.COM
Web:
http://WWW.NEWCON-OPTIK.COM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DN482 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Newcon Optik DN482

Summary of Contents for Newcon Optik DN482

  • Page 1 Measured NIGHT VISION RIFLESCOPE (2+/3 Image Intensifier Tube generation) In USA: 3310 Prospect Ave. Cleveland, OH 44115 In Canada: 105 Sparks Ave., Toronto, ON M2H 2S5 Canada Email: Operation Manual DN482/483 Tel: (416) 663-6963 Fax: (416) 663-9065 NEWCONSALES@NEWCON-OPTIK.COM Web: http://WWW.NEWCON-OPTIK.COM...

  • Page 2: Warranty

    NEWCON product for warranty service are your responsibility. Please include a check or money order made out to NEWCON OPTIK for the amount of $10.00 to cover shipping and handling. This covers products shipped in USA or Canada only.

  • Page 3: Table Of Contents

    10. TROUBLESHOOTING The scope does not work. Check that the batteries are installed properly. Check the charge of the batteries. Replace if they are weak. Do not use old batteries with new ones. The image does not appear in focus. Bring the inspected object to the center of the image.

  • Page 4: Brief Description

    CAREFULLY READ THE INSTRUCTIONS BEFORE USE! MISUSE WILL VOID THE WARRANTY. 1. BRIEF DESCRIPTION DN482/483 Night Vision Scope is a modern, universal night vision device designed for a wide range of activities from amateur to professional needs: • Nighttime observation and hunting •...

  • Page 5: Appearance Of The Device

    During further photo shooting sharpness of the system is obtained with the help of the objective of the DN482/483 only; • Set diaphragm on the objective of the camera equal 2.8 or 4 (shooting is possible even at lower diaphragm settings, for example 2, but the obtained pictures will have worse resolution).

  • Page 6: Technical Characteristics

    52 mm to your size. Such adapters are typically 51-64 sold at camera stores. IR diode 8-10 DN482/483 can be supplied with an optional adapter for photo/video devices for night photo/video shooting. VIDEO Night photo shooting with...

  • Page 7: Supplied Accessories

    NEVER AIM THE LENS IN THE DIRECTION OF BRIGHT LIGHT! a. Battery installation DN482/483 requires two AA batteries. Make sure that the batteries are in good condition and polarity is installed as it is indicated on the body of battery compartment (5).

  • Page 8: Testing Of Operation

    Variant III – side rail for East European (Warsaw Pact) rifles. Side rail can be used for the installation of DN482/483 on a hunting rifle with side rail. The appearance of the device with a side rail is shown below: It is recommended to contact NEWCON OPTIK for installation of the side rail.

  • Page 9: Installing On A Hunting Rifle

    • Place the scope on the rail of the rifle so that your eye coincides with the edge of the Eyepiece Guard or in case of a large caliber 6. INSTALLING ON A HUNTING RIFLE Night vision device DN482/483 may be used as a nighttime hunting scope. Recommendation.

  • Page 10: Variant Ii - Adapter Rail With 7/8" Weaver Prism Type

    Front and rear feet (2, 3) with thwart screws (6) are the standard feet for Standard prisms (4), manufactured by the companies that produce mounts (for example, Ernst Apel GmbH Germany). The mount of Standard prism type (4) and screws (5) are optional. Installation of the device should be performed according to the following rules: •...

This manual is also suitable for:

Dn483

Table of Contents