Subscribe to Our Youtube Channel
Related Manuals for Newcon Optik NEWCON Image Stabilizer SIB 16X40
Summary of Contents for Newcon Optik NEWCON Image Stabilizer SIB 16X40
- Page 1 Operation Manual SIB 16x40 GR BINOCULARS WITH IMAGE STABILIZATION In USA: 3310 Prospect Ave. Cleveland, OH 44115 In Canada: 1183 Finch Ave. W., Suite 302, Toronto, ON M3J 2G2 Canada NEWCON 2002© Printed in Canada...
-
Page 2: Important Information
IMPORTANT INFORMATION Read prior to activation You have just purchased a complicated electronic device. To operate it properly, please read this manual carefully. Here are some common precautions that must be noted. NEVER • hit the unit while operating or being transported NEVER •... -
Page 3: Table Of Contents
In USA: 3310 Prospect Ave. Cleveland, OH 44115 In Canada: 1183 Finch Ave. W., Suite 302, Toronto, ON M3J 2G2 From international: 1183 Finch Ave. W., Suite 302, Toronto, ON M3J 2G2, CANADA Features of the SIB 16x40 Gyro binoculars • Stabilized image •... -
Page 4: Brief Description
NEWCON product for warranty service are your responsibility. Please include a check or money order made out to NEWCON OPTIK for the amount of $15.00 to cover shipping and handling. This covers products shipped in USA or Canada only. -
Page 5: Troubleshooting
7. TROUBLE SHOOTING The stabilizing mode does not work. Check that the batteries are installed properly. Check the charge of the batteries. Replace if they are weak. Do not use old batteries with new ones. The image does not appear in focus. Bring the inspected object to the center of the image. -
Page 6: Storage And Maintenance Instructions
1–cartridge with AA type batteries; 2–connector; 3–pin; 4–cramp; 5–delimiter; 6–lock Fig. 2 – Power Supply Unit The device is powered by either a cartridge with batteries (1) or by an on-board power source 12±1.2 V via connector (2). The power supply unit is attached to the device using delimiter (5) and lock (6). -
Page 7: Technical Characteristics
In no less than a minute, press lever 5 (fig. 1) in the arrow indicated direction in order to engage the stabilizing mode and hold it in this position while observing. ATTENTION! It is not allowed to engage the stabilizing mode of the device when the power supply control indicator is not glowing, or in less than a minute after device has been turned ON. -
Page 8: Supplied Accessories
4. SUPPLIED ACCESSORIES SIB 16x40 Gyro is supplied in the following assembly: - Device - Objective lens caps - Carrying Case - Neck Strap - Hand Strap - DC regulator - User’s manual - Warranty card Optional accessories: - Amber Filters (optional) - Night Vision eyepieces (optional) 5.
Need help?
Do you have a question about the NEWCON Image Stabilizer SIB 16X40 and is the answer not in the manual?
Questions and answers