Mitsubishi Electric meiki series Instruction Manual page 7

Table of Contents

Advertisement

Available languages

Available languages

KN51051BA英仏_英 10.10.18 0:49 PM ページ 5
――――――――――― INSPECTION OF RESPECTIVE SECTIONS ―――――――――――
Make sure to inspect these sections before operating the engine.
Inspection of fuel
● Is sufficient quantity of oil reserved?
● Is not the fuel degenerated?
● Use the proper fuel referring to the
"Fuel" section.
CAUTION
● Sufficient care must be taken on the
fire not only when replenishing but
also handling fuel. It could cause fire
or explosion.
● Securely close the oil tank cap. Fuel
may leak if the cap is tightened aslant.
It will never leak if the cap is tightened
properly.
(Excluding: TL tank cap breather type)
Inspection of air cleaner
● Is not fouled the air cleaner element?
● When the element is fouled or it is
not impregnated with oil, inspect and
service it in accordance with
"Inspection and servicing before each
operation" on page 12.
Inspection of screws and nuts
● Check respective sections for loose
or missing screws or nuts.
● Service them if necessary.
Inspection of clogging
● Check the cooling fins, around the
muffler and cooling air inlet for trash
or withered grasses trapped.
● Remove them if necessary.
Inspection of fuel pipes
● Check for cracks or fissures on the
fuel pipe and grommet, disconnection
or fuel leakage from joints on the fuel
tank and carburetor.
CAUTION
Cracks, fissures or disconnection from
joints could cause fire or explosion by
leaked
fuel.
damaged fuel pipe and grommet.
― 5 ―
Service
or
replace

Advertisement

Table of Contents
loading

Table of Contents