Samsung DW-FG720 User Manual page 32

Troubleshooting and
information codes
INFORMATION CODES
Information codes are displayed to help you better understand what is occurring with your dishwasher.
If any of the codes below occur, you should select the Reset option and follow the respective instruction.
CODE SYMBOL
bE2
3E, AE
5E
4E
4E1
HE, HE1
tE
1E
PE
LE
OE
For more information about the error codes, or if you are unable to resolve the problem using the
suggested solution, refer to the back of this manual and contact your Samsung Customer Service
centre.
32_ Troubleshooting and information codes
DD68-00093A-04_S05_140602_EN.indd 32
MEANING
Button key error
Internal communication error
Drain error
Water supply error
Hot water supply
Heater error
Temperature sensor error
Low water level error
Synchronous motor position error
Water Leak error
Excess Water error
SOLUTION
Check if any buttons are stuck, or if
a button has been pressed for more
than 30 seconds.
Turn off and restart the appliance.
Check whether the drain hose is
clogged or folded.
Make sure the water supply valve
open.
Make sure the temperature of supplied
water is not higher than 80 ºC.
Turn off the appliance and unplug the
power at the socket, close the water
supply valve and contact the service
center for more help.
Turn off and restart the appliance.
Turn off the appliance and unplug the
power at the socket, close the water
supply valve and contact the service
center for more help.
2/6/2014 17:46:36