Loading Printing Paper - Canon PIXMA iP2600 Quick Start Manual

Loading Printing Paper

Important
Always load paper in portrait orientation. Loading paper in landscape orientation can cause the paper to
be jammed.
Note
If you cut plain paper to 4" x 6" / 101.6 x 152.4 mm, 5" x 7" / 127.0 x 177.8 mm, or 2.13" x 3.39" / 54.0 x
86.0 mm (credit card-size) for a trial print, it can cause paper jams.
1
Open the Paper Support.
2
Open the Paper Output Tray fully.
If it is not opened fully, an error may occur.
3
Extend the Output Tray Extension.
4
Adjust the position of the Paper Thickness
Lever.
The Paper Thickness Lever switches the
clearance between the Print Head and the
loaded paper to match the media type.
Set it to the right when printing on envelopes or
T-shirt transfers, and left when printing on any
other type of paper.
5
Load the paper in the Rear Tray with the
print side facing UP.
Do not load higher than the Load Limit Mark (A).
6
Align the paper stack against the right side
of the Rear Tray.
7
Pinch the Paper Guide and slide it against
the left side of the paper stack.
Do not slide the Paper Guide too strong. Paper
may not be fed properly.
8 Loading Printing Paper
1
4 2
5
(A)
7
3
6