Kenwood DV-303 Service Manual page 12

DV-303/DVF-5020/K5020
QQ
3 7 63 1515 0
2-15 Disassembling the Intermediate Chassis
1. Push the stopper downward, then rotate it until it contacts
the Vertical cam.
2. Release the 2 tabs.
TE
L 13942296513
2-16 Disassembling the Vertical cam and Drive
gear
1. Rotate the Vertical cam until it reaches the contact posi-
tion.
2. Lift the Vertical cam straight upward to pull it out.
3. Remove the Drive gear.
www
.
12
DISASSEMBLY FOR REPAIR
x ao u163
y
i
2 9
8
2-17 Disassembling the Pulley Gear and Decelera-
tion Gear
1. Remove the screw.
2. Remove the pulley gear.
3. Remove the belt.
4. Remove the deceleration gear.
Q Q
3 6 7 1 3 1 5
2-18 Disassembling the Mechanism Loading
C.B.A.
1. Remove the 2 screws.
2. Remove the 2 screws.
3. Release the three tabs.
co
.
9 4 2 8
0 5 8 2 9 9 4 2 8
m
9 9
9 9