Product Specifications - Ducati monster S4 2002 Workshop Manual

PRODUCT SPECIFICATIONS

Symbols inside the diagram show the type of threadlocker, sealant or lubricants to be used at the points indicated.
The table below shows the symbols together with the specifications for the threadlockers, sealants and lubricants
to be used.
Symbol Specifications
Engine oil (for specifications, see page 26).
DOT 4 special hydraulic brake fluid.
SAE 80-90 gear oil or special products for chains with O-rings.
Anti-freeze (nitride, amine and phosphate free)
35-40% water solution.
GREASE A Multipurpose, medium fibre, lithium grease.
A
GREASE B Molybdenum disulphide grease, high mechanical stress and high SHELL
B
temperature resistant.
GREASE C Bearing/joint grease for parts subject to prolonged
C
mechanical stress. Temperature range: -10 to 110 °C.
GREASE D Protective grease. Corrosion protectant, waterproof.
D
GREASE E PANKL grease PLB 05.
E
GREASE F OPTIMOL grease PASTE WHITE T.
F
LOCK 1 Low-strength threadlocker.
1
LOCK
LOCK 2 Oil-compatible medium-strength threadlocker.
2
LOCK
LOCK 3 High-strength thread sealant for threaded parts.
3
LOCK
LOCK 4 Flange sealant. Resistant to high mechanical stress, solvents and LOCTITE 510
4
high temperatures (up to 200 °C). For pressures up to 350 Atm.
LOCK
Fills gaps up to 0.4 mm.
LOCK 5 Permanent adhesive for smooth or threaded cylindrical fasteners LOCTITE 128455
5
on mechanical parts. High resistance to mechanical stresses and
LOCK
solvents. Temperature range: -55 to 175 °C.
LOCK 6 Pipe sealant for pipes and medium to large fasteners. For water
6
and gases (except oxygen). Maximum filling capacity: diameter
LOCK
gaps up to 0.40 mm.
LOCK 7 Speed bonder for rubber and plastics. Elastomer loaded ethylic base. LOCTITE 480
7
LOCK
LOCK 8 Retaining compound for threaded parts, bearings,
8
bushes, splines and keys. Temperature range: -55 to 150 °C.
LOCK
LOCK 9 Medium-strength threadlocker
9
LOCK
DUCATI liquid gasket - part no. 942470014
Exhaust pipe paste. Self-curing sealant, hardens when heated.
For temperatures over 1,000 °C.
Spray used in treating electrical systems to eliminate moisture and SHELL
condensation. Provides high resistance to corrosion. Waterproof.
28 Generalità / Description
Recommended product
SHELL
Advance Ultra 4
SHELL
Advance Brake DOT 4
SHELL
Advance Chain or
Advance Teflon Chain
SHELL
Advance coolant or
Glycoshell
SHELL Alvania R3
Retinax HDX2
SHELL
Retinax LX2
SHELL
Retinax HD2
LOCTITE 222
LOCTITE 243
LOCTITE 270
LOCTITE 577
LOCTITE 601
LOCTITE 401
Advance Contact Cleaner