Transport And Storage; First Aid - Makita UC3041A Instruction Manual

Hide thumbs Also See for UC3041A:
Table of Contents

Advertisement

Available languages

Available languages

2
1
014317
Run-down brake:
The chain saw is equipped with an run down brake
which brings the saw chain to an immediate stop
when the ON/OFF switch is released. This
prevents the saw chain from running on when
switched off, and thus presenting a hazard.
The front and rear hand guards protect the user
against injury from pieces of wood which may be
thrown backwards, or a broken saw chain.
The trigger lockout prevents the chain saw from
being switched on accidentally.
The chain catcher protects the user against injury
should the chain jump or break.

Transport and storage

When the chain saw is not in use or is
being transported, withdraw the mains
plug and fit the guide bar cover supplied
with the saw. Never carry or transport
the saw with the saw chain running.
1.
Carry the chain saw by the front handle only, with
the bar pointing backwards.
2.
Keep the chain saw in a secure, dry and locked
room out of the reach of children. Do not store the
chain saw outdoors.
MAINTENANCE
1.
Withdraw the plug from the socket before carrying
out any adjustments or maintenance.
2.
Check the power cable regularly for damage to
the insulation.
3.
Clean the chain saw regularly.
4.
Have any damage to the plastic housing repaired
properly and immediately.
5.
Do not use the saw if the switch trigger is not
working properly. Have it properly repaired.
6.
Under no circumstances should any modifications
be made to the chain saw. Your safety is at risk.
7.
Do not carry out maintenance or repair work other
than that described in this instruction manual. Any
other work must be carried out by authorized
service centers.
8.
Only
use
genuine
accessories intended for your model of saw. The
use of other parts increases the risk of accident.
1. Chain brake
applied
2. Chain brake
released
replacement
parts
and
9.
We accept no responsibility for accidents or
damage should non-approved bars, saw chains
or other replacement parts or accessories be
used.

First aid

Do not work alone. Always work within
shouting distance of a second person.
1.
Always keep a first-aid box to hand. Replace any
items taken from it immediately.
2.
Should you request assistance in the event of an
accident, state the following:
Where did the accident happen?
What happened?
How many persons are injured?
What injuries do they have?
Who is reporting the accident?
NOTE:
Individuals with poor circulation who are exposed to
excessive vibration may experience injury to blood
vessels or the nervous system.
Vibration may cause the following symptoms to occur in
the
fingers,
hands
"(numbness),
tingling,
alteration of skin colour or of the skin.
If any of these symptoms occur, see a physician!
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this
instruction manual may cause serious personal
injury.
Symbols
The followings show the symbols used for tool.
volts
amperes
hertz
alternating current
Class II Construction
meter per second
feet per minute
7
or
wrists:
"Falling
pain,
stabbing
sensation,
asleep
USD310-1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Uc3541aUc4041a

Table of Contents