Specifications; Specific Safety Rules - Makita 9032 Instruction Manual

ENGLISH
1-1. Screw
1-2. Arm
2-1. Lock button
2-2. Switch trigger
3-1. Speed adjusting dial
4-1. Arm
4-2. Abrasive belt

SPECIFICATIONS

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for the sanding of large surface of
wood, plastic and metal materials as well as painted
surfaces.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For European countries only
Noise and Vibration
The typical A-weighted sound pressure level is 84 dB (A).
Uncertainty is 3 dB(A).
The noise level under working may exceed 85 dB (A).
Wear ear protection.
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
These values have been obtained according to
EN60745.
For Model 9032
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
EN60745, EN55014, EN61000 in accordance with
Council Directives, 89/336/EEC, 98/37/EC.
Yasuhiko Kanzaki CE2005
Explanation of general view
4-3. Cam lever
4-4. Rear pulley
5-1. Arm
5-2. Adjusting dial
6-1. Dust nozzle
6-2. Hose 28
6-3. Hose of vacuum cleaner
Model
Belt size
Belt speed
Overall length
Net weight
Safety class
2
.
ENE052-1
000087
ENF002-1
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
Responsible manufacturer:
Makita Corporation Anjo Aichi Japan

SPECIFIC SAFETY RULES

ENG003-2
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to belt sander safety rules. If you use this tool
unsafely or incorrectly, you can suffer serious
personal injury.
1. Hold power tools by insulated gripping
surfaces when performing an operation where
the cutting tool may contact hidden wiring or
its own cord. Contact with a "live" wire will make
exposed metal parts of the tool "live" and shock
the operator.
2. Ventilate your work area adequately when you
perform sanding operations.
3. Some material contains chemicals which may
ENH101-5
be toxic. Take caution to prevent dust
inhalation and skin contact. Follow material
supplier safety data.
4. Always use the correct dust mask/respirator
for the material and application you are
working with.
5. Always
Ordinary eye or sun glasses are NOT safety
glasses.
3
6-4. Vacuum cleaner
7-1. Dust nozzle
7-2. Hose 28
7-3. Dust collector
10-1. Limit mark
11-1. Brush holder cap
11-2. Screwdriver
9032
9 mm x 533 mm
5 -28 m/s
420 mm
1.5 kg
/II
Director
use safety glasses or goggles.
GEB015-1