Update the software
to the latest version
To upgrade later,
1. The TV searches for and then displays all the wireless networks
within range. When done, it displays a list of the networks. In the list
of networks, move the Highlight to select a network, and then select
Next. If the selected network requires a Security Key, the Security
Key screen appears.
If you have a WPS(PBC) compatible router, select WPS(PBC)
instead, and then follow the directions on the screen. When
done, go to Step 4.
2. Enter your network security key or WPS PIN using your remote.
Enter numbers and letters using your remote.
• If you are using the standard remote, you can enter numbers by
pressing the number buttons on the remote.
• To enter a letter, move the Highlight to the letter, and then select it.
You can enter numbers in the same fashion if you choose.
To display capital letters (or redisplay small letters if capital letters are
displayed), select Caps or Shift.
To display symbols and punctuation, select 1F. To redisplay letters,
select 1F again.
3. When done, select Next if you have entered a security key or WPS
PIN if you have entered a WPS PIN.
4. The TV checks the wireless connection. If the connection is
successful, the You are connected to the Internet. If you have any
problems using online services, please contact your Internet
service provider. message appears. Select Next, and then go to
Step 4 Software Upgrade.
If the connection fails, select Previous, repeat Step 1 and 2,
carefully re-enter your security key or WPS PIN, then repeat
Steps 3 and 4. If it fails again, select Next on the "Connection
Failed" screen, and then go to 5 - Selecting an area on the next
page. Configure your network later through Network Settings
in the TV's Menu. For more information, refer to "Setting up the
Wired or Wireless Network" in the e-Manual or see the Network
Connection sections in this manual (page 25).
The TV checks the network connection, then displays the You are
connected to the Internet. If you have any problems using online
services, please contact your Internet service provider. message
appears. Select Next. The Software Upgrade screen appears.
When Network Settings is complete, your TV will check for a new
software version automatically. If new software is available, the TV
downloads and installs the new software. When the download is
complete, select Next.
If you want to upgrade later, select Skip. For more information, refer
to Software Upgrade (Preference Features → Support Menu) in the
This may take some time, depending on your network status.
You can only upgrade software if your TV has an active network
If no new update software is available, a no new updates message
appears on the screen. Select OK.
English - 17