Sony DVP-NS300 Service Manual page 12

QQ
3 7 63 1515 0
Connecting to a Dolby Surround (Pro Logic) decoder amplifier (receiver) and
C
3 to 6 speakers
This connection will allow you to enjoy the surround effects of the Pro Logic decoder on your
amplifier (receiver). If you have an AV amplifier (receiver) equipped with a Dolby Digital, or
DTS decoder, refer to page 23.
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
Pro Logic uses a minimum of 3 speakers (front L and R, and rear (monaural)). The surround
effects are enhanced if 6 speakers (front L and R, center, rear L and R, and subwoofer) are used.
If your amplifier (receiver) has R and L audio input jacks only, use
(receiver) has a digital input jack, use
xRecommended surround sound effects using this connection with your amplifier (receiver)
•Dolby Surround (Pro Logic) (page 64)
z
For correct speaker setting location, please refer to the operating instructions of the amplifier (receiver).
CD/DVD player
DIGITAL OUT LINE OUT
PCM/DTS/
DOLBY DIGITAL
R-AUDIO 1-L VIDEO 1
COAXIAL OPTICAL
R-AUDIO 2-L VIDEO 2
C-2
DIGITAL OUT
PCM/DTS/
DOLBY DIGITAL
COAXIAL OPTICAL
Optical digital cord
(not supplied)
Remove jack cap
before connecting
to coaxial or optical digital input
[Speakers]
Rear
Rear
(L) (R)
Subwoofer
TE
L 13942296513 l: Signal flow
∗ When connecting 6 speakers, replace the monaural rear speaker with a center speaker, 2 rear speakers and a
22
subwoofer.
Step 3: Connecting the Power Cord
Plug the player and TV power cords into an AC outlet.
Do not connect the power cord of your player to the "switched" power socket of an amplifier
(receiver). Otherwise, when you turn off the power of your amplifier (receiver), the settings for
the player may be lost.
Step 4: Quick Setup
Follow the steps below to make the minimum number of basic adjustments to use the player.
To skip an adjustment, press >. To return to the previous adjustment, press ..
POWER
A Turn on the TV.
B Switch the input selector on the TV to the player.
C Press POWER on the player and press [/1 on the remote.
"Press [ENTER] to run QUICK SETUP" appears at the bottom of the screen. If this
message does not appear, select "QUICK" under SETUP in the Control Menu (page 13) to
run Quick Setup.
D Press ENTER without inserting a disc.
www
The Setup Display for selecting the language used in the on-screen display appears.
.
24
http://www.xiaoyu163.com
C-1 . If your amplifier
C-2 .
S VIDEO COMPONENT
VIDEO OUT
OUT
Y
P B
P R
Stereo audio cord
LINE OUT
(not supplied)
Coaxial digital cord
(not supplied)
R-AUDIO 1-L
or or
R-AUDIO 2-L
(white) (red)
to audio input
Dolby Surround amplifier (receiver)
Rear*
center
(mono)
ENTER
./> X/x
x ao
LANGUAGE SETUP
y
OSD: ENGLISH
DVD MENU: ENGLISH
AUDIO: FRENCH
SUBTITLE: SPANISH
i PORTUGUESE
http://www.xiaoyu163.com
8
Connecting to an AV amplifier (receiver) with a digital input jack having a
D
Dolby Digital, or DTS decoder, and 6 speakers
This connection will allow you to use the Dolby Digital, or DTS decoder function of your AV
amplifier (receiver). Yo u are not able to enjoy the TVS sound effects of the player.
xRecommended surround sound effects using this connection with your amplifier (receiver)
•Dolby Digital (5.1ch) (page 64)
•DTS (5.1ch) (page 64)
z
To enhance the surround sound effects, refer to the operating instructions of the amplifier (receiver) for correct
speaker setting location.
Note
After you have completed the connection, be sure to set "DOLBY DIGITAL" to "DOLBY DIGITAL"(page 24).
If your AV amplifier (receiver) has a DTS decoder, set "DTS" to "ON" (page 28). Otherwise, no sound or a loud
noise will come from the speakers.
CD/DVD player
DIGITAL OUT
PCM/DTS/
DOLBY DIGITAL
R-AUDIO 1-L
COAXIAL OPTICAL
R-AUDIO 2-L
C-1
DIGITAL OUT
VIDEO 1
DOLBY DIGITAL
COAXIAL
VIDEO 2
[Speakers]
Rear
(R)
Front Front
(L) (R)
[Speakers]
Q Q
Rear
Subwoofer
3 6 7 1 3
(L)
: Signal flow
E Press X/x to select a language.
The player uses the language selected here to display the DVD menu and subtitles as well.
F Press ENTER.
The Setup Display for selecting the aspect ratio of the TV to be connected appears.
G Press X/x to select the item.
TV type
4:3 standard TV
[/1 I/1
A wide-screen TV or 4:3 standard TV with
the wide-screen mode
H Press ENTER.
The Setup Display for selecting the type of jack used to connect your amplifier (receiver)
./>
appears.
X/x
ENTER
I Press X/x to select the item, then press ENTER.
• When "NO" or "LINE OUTPUT L/R (AUDIO)" is selected, Quick Setup is finished and
connections are complete.
• When "DIGITAL OUTPUT" is selected, the Setup Display for "DOLBY DIGITAL"
appears. Proceed to Step 0.
J Press X/x to select the item.
Choose the item that matches the audio connection you selected in page 21 to 23 (
through ).
A D
u163
.
1-5
2 9 9 4 2 8
LINE OUT S VIDEO COMPONENT
VIDEO OUT
OUT
Y
VIDEO 1
P
B
P
R
VIDEO 2
D
PCM/DTS/
OPTICAL
or
Optical digital cord
Coaxial digital cord
(not supplied)
(not supplied)
Remove jack cap
before connecting
to optical digital input to coaxial digital input
AV amplifier (receiver) with a decoder
1 5 0 5 8 2 9 9 4
SCREEN SETUP
TV TYPE:
SCREEN SAVER: 4:3 LETTER BOX
4:3 PAN SCAN
BACKGROUND:
16:9
Yo u select
4:3 LETTER BOX or 4:3 PAN
SCAN
16:9
4:3 LETTER BOX
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
YES
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
NO
m
AUDIO SETUP
co
AUDIO ATT: OFF
AUDIO DRC: STANDARD
DOWNMIX: DOLBY SURROUND
DIGITAL OUT: ON
DOLBY DIGITAL: D-PCM
DTS: D-PCM
DOLBY DIGITAL
9 9
Front
(R)
[Speakers]
Front (L) Center
2 8 9 9
23
Page
56
56
B
continued
25