Camera adjustment
1.
Loosen Adjustment Wheel,
rotate Camera as needed, then
tighten Adjustment Wheel.
2.
Loosen Adjustment Screw,
tilt Camera as needed, then
tighten Adjustment Screw.
note: Only loosen Adjustment
Screw slightly, do not remove it.
Cable Connections
CautiOn! Route the Cable so
as to avoid a tripping hazard.
1.
Connect Video from Camera to Cable.
2.
Connect Power from Camera to Cable.
3.
Connect Video from Cable to Video
Input Device (DVR, TV, Monitor, etc).
Page 8
Downloaded from
www.Manualslib.com
1
2
For technical questions, please call 1-800-444-3353.
manuals search engine
adjustment
Wheel
4.
Connect Power from Cable
to Power Adapter.
5.
Plug Power Adapter into a
120 volt electrical outlet.
CautiOn! The Power Adapter MUST be
plugged in indoors in a clean, dry location.
Video Input Device
3
Figure e
adjustment
Screw
Figure D
4
5
Item 61208