Table of Contents
Advertisement
Progress Codes
This section describes the progress code values.
Table 4-5. Progress Codes
Range
0x00-0x1f
0x20-0x3f
0x40-0x5f
0x60-0x7f
HTTP://MYCOMP.SU/ - Maintenance and Service Guide,Service Manual,Motherboard Schematics for Laptop/notebook
4-30
.
Standard progress Codes. All other values are reserved.
POSTCODE_PC_COMP_PEI_BEGIN (0x01) - The component was
loaded and the PEI entry point called.
POSTCODE_PC_COMP_PEI_END (0x02) - The component returned
from the PEI entry point.
POSTCODE_PC_COMP_DXE_BEGIN (0x03) - The component was
loaded and the DXE/UEFI entry point called.
POSTCODE_PC_COMP_DXE_END (0x04) - The component returned
from the DE/UEFI entry point.
POSTCODE_PC_COMP_SUPPORTED (0x05) - The Supported()
member function of the component's instance of the Driver Binding
protocol was called.
POSTCODE_PC_COMP_START (0x06) - The Start() member function
of the component's instance of the Driver Binding protocol was called.
POSTCODE_PC_COMP_STOP (0x07) - The Stop() member function of
the component's instance of the Driver Binding protocol was called.
POSTCODE_PC_COMP_SMM_INIT (0x08) - The component was
loaded and the entry point called inside of SMM.
POSTCODE_EC_DEVICE_ERROR (0x09) - The driver encountered a
condition where it cannot proceed due to a hardware failure.
POSTCODE_EC_RESOURCE_ERROR (0x0a) - The driver
encountered a condition where it cannot proceed due to being unable to
acquire resources.
POSTCODE_EC_DATA_CORRUPT (0x0b) - The driver encountered a
condition where it found invalid data and could not continue.
Component-Specific Progress Codes. These values are specific to the
component type.
OEM Progress Codes. These progress codes are reserved for OEM
usage.
Reserved. These are reserved for future expansion.
пч сти и комплектующие для ноутбук . хемы, сервис м ну лы, инструкции по р зборке ноутбук .
. г.
нкт- етербург, ел.(812)951-37-99, ел.8-921-951-37-99,ICQ:573812745, service@it-lux.ru
Description
0
Troubleshooting
Advertisement
Table of Contents
