New Balance NB464 User Manual

Model: NB464
Behind-The-Neck
Sport Headphones

Using Your New Balance Sport Headphones with Foldable Neck Band

Your New Balance Headphones feature a foldable neckband for compact storage. Unfold the neckband
completely and place it over your head and behind your neck as shown with the earpieces over your ears
and the headphone plug on your left side.
Your New Balance Sport Headphones are
supplied with two additional sets of plastic
color caps to allow you to customize the
look to match your mood. To replace the
original caps simply lift up the edge of the
cap as shown to remove it. Install a new
cap and gently press down on the cap until
it 'snaps' into place.
Your New Balance Sport Headphones are also supplied
with two sets of silicon speaker covers. You may wish to
replace the original sponge speaker covers with the
washable silicon speaker covers if you perspire heavily
during exercise.
To replace the speaker covers, carefully lift the sponge
covers off the speaker housing and then stretch the silicon
covers over the housing.
Your New Balance Sport Headphones were designed with a modular cord system. We have provided a 15"
iPod/iPhone control cable that is suitable if your music player will be worn in an armband or clipped to your
clothing at chest level. We have also provided a 36" cable that is suitable if your music player will be clipped
to your belt, placed in your pocket or carried in a fanny-pack. You may connect both cables together in
case you want to control your iPod or iPhone and the 15" or 36"cable is not long enough.
Connect the male headphone plug of the headphones to the female headphone jack of either the 15" or
36" headphone cable depending on your wearing preference. Then connect the male headphone plug of
the 15" or 36" cable to the headphone jack of your music player. Be sure that the plugs are fully inserted
into the jacks. If the plugs are not fully inserted you may only hear sound from one earpiece.

Using the iPod/iPhone Control Cable

Connect the 15" iPod/iPhone cable between your headphones and your iPod/iPhone to perform the
following operations with the remote controller mounted on the cable:
To Do This
Activate voice control*
Answer or end a call
Ignore an incoming call
Answer a second incoming call
and place original call on hold
Answer a second incoming call,
and end original call
Switch between two calls
Play or Pause
Skip Track or Chapter Forward
Skip Track or Chapter Back
Increase Volume
Decrease Volume
Activate VoiceOver**
Navigate Playlists using VoiceOver**
Click to Increase
Volume
Click to Play/Pause
Click to Decrease
Volume
Action Required
Depress the Master Control for 2 seconds
Press the Master Control once to answer call
Press the Master Control again to end call
Depress the Master Control for 2 seconds
Press the Master Control once to answer second call
Press the Master Control again to return to first call
Depress the Master Control for 2 seconds
2 low tones will confirm end of original call.
Press the Master Control once to switch between calls
Press Master Control once to Play, again to Pause
Press Master Control 2 times quickly
Press Master Control 3 times quickly
Press the "+" button
Press the " - " button
Press and hold the Master Control to hear title and
artist of currently playing song
Press and hold the Master Control until tone is heard,
then release. When the name of the desired playlist is
heard, press the Master Control once to select it.
Master Control
Click x2 for Next Track
Click x3 for Previous Track
Press + Hold for iPod
Shuffle VoiceOver