Pioneer BCS-707 Operating Instructions Manual page 62

62 Operation
Entering a network user ID and the
password
Depending on your PC's environment, you
may need to enter a network user ID and the
password for accessing a shared folder.
1. The keyboard menu appears automatically
if the network user ID and the password are
required.
2. Use U / u / I / i to select a character then
press ENTER ( ) to coni rm your selection
on the keyboard menu.
To enter a letter with an accent mark, select
the letter from the extended character set.
Example: Select "D" and then press DISPLAY
( ) to display the extended character set.
Use to select "D" or "Ď" and then press
I / i
ENTER ( ).
4
[Clear] – Clear all entered characters.
[Space] – Inserts a space at the cursor
position.
[<–] – Deletes the previous character at the
cursor position.
[ABC / abc / #+-=&] – Change the keyboard
menu settings to capital letters, small letters
or symbols.
3. When you i nish entering the network user
ID and password, select [OK] using U / u / I /
i and press ENTER ( ) to access the folder.
The network user ID and password will be
remembered after accessing the folder
for your convenience. If you do not want
the network user ID and password to be
remembered, press red (A) coloured button
to un-tick the [Remember] check box
before accessing the folder.