Speaker Setup For Bcs-303; Large Non-Skid Pads - Pioneer BCS-707 Operating Instructions Manual

18 Installation

Speaker Setup for BCS-303

Preparing the speakers
1. Attach the non-skid pads to the base of
each speaker.
For speaker stand bases:
Use the supplied adhesive to attach four
middle pads to the base (bottom) of each
speaker stand base.
3
For subwoofer:
Use the supplied adhesive to attach four
large pads to the base of subwoofer.
small non-skid pads

large non-skid pads

For centre speaker:
Use the supplied adhesive to attach four
small pads to the base of centre speaker.
2. Connect the wires to the player.
Connect the white wire with gray line into
(+) side and the other wire into (–) side. To
connect the cable to the player, press each
plastic i nger pad to open the connection
terminal. Insert the wire and release the
i nger pad.
small non-skid pads
Coloured (+)