Download  Print this page

Chapter 2 Names And Functions Of Parts; Front Panel - Sony PDW-U1 Operation Manual

Professional disc drive unit.
Hide thumbs

Advertisement

Names and Functions
of Parts

2-1 Front Panel

1
2
ACCESS
3
ERROR/ALARM
4
DISC IN
5
Z EJECT
6
a
(power) indicator
Lights green when the 1 (power) button on
the rear panel is on.
b ACCESS indicator
Flashes blue when the disc is being
accessed from the computer. If the 1
(power) button on the rear panel is pressed,
turning it off, while this indicator is
flashing, then the unit goes into the standby
mode.
Note
Do not press the 1 (power) button on the
rear panel to turn off, or disconnect the
power cord while the ACCESS indictor is
flashing. Doing so may lead to a loss of data
on the disc.
c ERROR/ALARM indicator
If a fault occurs in the unit, this lights
continuously or flashes red, as shown in the
following table.
Indicator
Lit continuously
Flashing four
7
times a second
Flashing once a
second
Note
The indicator may flash or light only for
five seconds depending on the alarm.
You can check alarms generated by this unit, using
the alarm log of the utility software. For details,
refer to the help file of the utility software.
If the indicator is flashing four times a second, and
it is not possible to check the alarm log, a
malfunction may have occurred. In this case, contact
your Sony service representative.
When the error is eliminated, the indicator
goes off.
d DISC IN indicator
Lights green when a disc is loaded.
e Manual eject mechanism
When there is no power supply to the unit,
to eject the disc, remove the cover over this
2
Chapter
Meaning
Condensation has
occurred.
An error occurred
(principally a
hardware default).
An alarm not listed
above occurred.
2-1 Front Panel
49

Advertisement

Chapters

Table of Contents

   Also See for Sony PDW-U1

   Related Manuals for Sony PDW-U1

Comments to this Manuals

Symbols: 0
Latest comments: