Connecting The Speaker Output Terminals; Using The Speaker Input; Connecting The Speaker Wires - Pioneer GM-D7400M Owner's Manual

Connecting the Unit
Connecting the Speaker Output
Terminals
• Connections when using the speaker
input
• Use a 10 AWG to 16 AWG wire for the speaker
wire.
1. Expose the end of the speaker wires
using nippers or a cutter by about
10 mm to 12 mm (3/8 in.).
----------'~
I· · 1
10 mm to 12 mm (3/8 in.)
Car Stereo
-------.Sp
r
1
eaker output
2. Connect the speaker wires to the
speaker output terminals.
• Fix the speaker wires securely with the termi-
nal screws.
Terminal screws
Speaker output
~
termmal
~
~~,
Speaker wire
raIPlIIE!IIl1P,
~~
~~
Using the Speaker Input
Connect the car stereo speaker output
wires to the amplifier using the supplied
speaker input wire with RCA pin cord.
• Slide the input switch to the left (SP).
White: Black: Black: Red:
Left (f> Left
8
Right
8
Right (f>
~Speaker
input
wire with RCA
pin cord
To RCA input
jack of this unit.
Connecting the Speaker Wires
Connect the speaker leads according to the
figures shown below.
~ ~
nono~l~r
l!j0
0
0 0
_1_==-
~S •• __••.•
J'_
-
Subwoofer