Configuring The Vfc Interface Fcf Priority; Displaying And Maintaining Vfc Interfaces And Fip; Vfc Interfaces And Fip Configuration Example; Network Requirements - HP 5920 series Configuration Manual

Step
2. Configure the system
FCF priority.

Configuring the VFC interface FCF priority

Step
1. Enter system view.
2. Enter VFC interface
view.
3. Configure the FCF
priority for the VFC
interface.

Displaying and maintaining VFC interfaces and FIP

Execute display commands in any view.
Task
Display VFC interface information.
Display FCoE global configuration.
Clear the statistics for VFC interfaces.

VFC interfaces and FIP configuration example

Network requirements

As shown in
the number of devices, network adapters, and cables.
Command
fcoe global fcf-priority
priority
Command
system-view
interface vfc
interface-number
fcoe fcf-priority priority
Figure 12, use the FCoE solution in a data center combining a LAN and a SAN to reduce
Remarks
The default setting is 128.
The configuration takes effect on all VFC
interfaces in F mode.
Remarks
N/A
N/A
The default setting is 128.
The configuration takes effect on a VFC interface
only when it operates in F mode.
Command
display interface [ vfc [ interface-number ] ] [ brief
[ description ] ]
display fcoe
reset counters interface [ vfc [ number ] ]
16