Quick Reference To Controls; Quick Reference To Display Screen; Built-In Compressor Protection; Temperature Buttons - Honeywell PRO TH3210D Manual

PRO TH3210D Non-programmable Digital Thermostat
i
4
Digital display screen
Fan switch
On: Fan runs continuously.
Auto: Fan runs only when heating
or cooling system is on.
Temperature buttens
Press to adjust temperature
settings
System switch
Cooh Thermostat controls only
the cooling system.
Heat: Thermostat controls only
the heating system.
Off: Heating and cooling
systems are off.
• Em Heat: Thermostat controls
emergency and auxiliary heat.
Compressor is locked out.
Current inside temperature Temperature setting
Law battery warning
System status
Era: Emergency heat on
Aux: Auxiliary heat on
Heat On/Cool On:
(Flashes when waiting
for compressor restart)
This feature helps prevent damage to the
compressor.
Damage can occur if the compressor is re-
started too soon after shutdown.This feature
forces the compressor to wait _k)r a few min-
utes
beibre restarting.
During tile wait time, the message Cool On
or Heat On will flash on the display.When
Message flashes until safe
the sate wait time has
elapsed,
the message
restart time has elapsed
stops flashing and the compressor turns on.