Attach all safety devices before using the sewing machine. If the machine is used without these devices attached,
injury may result.
Turn off the power switch at the following times.
The machine may operate if the treadle is depressed by mistake, which could result in injury.
When threading the needle
When replacing the bobbin and needle
When not using the machine and when leaving the machine unattended
Do not touch any of the moving parts or press any objects against the machine while sewing, as this may result in
personal injury or damage to the machine.
Use both hands to hold the machine head when tilting it back or returning it to its original position. If only one hand
is used, the weight of the machine head may cause your hand to slip, and your hand may get caught.
1. Carry out the programming which is necessary for sewing.
(Refer to "Using the operation panel (1)" or "Using the
control box panel (2)".)
2. Depress the treadle to start sewing.
When the actuator (1) or the reverse lever (2) is pressed
during sewing, the feed direction will be reversed. When it is
released, the feed direction will return to normal.