Pioneer N-50 Service Manual page 26

1
4-1. System Information
When the System Information is selected, the screen below is displayed.
A
[Display screen]
System Information
MainCPU Ver.: 0.001
SubCPU Ver.: 0.001
DSP Ver.: 0.001
B
Model: N-50
System Information
MAC: 74:5e:1c:06:ab:2d
IP : 192.168.0.1
C
4-2. MainCPU Update Via USB
See the "8.1 FIRMWARE UPDATE".
4-3. SubCPU Update Via USB
See the "8.1 FIRMWARE UPDATE".
D
4-4. Error display for protection circuit, etc.
When "Error Information" is selected on the ServiceMenu, the screen below is displayed.
USB OL : 000
USB W ERR : 000
BT OL : 001
E
[ENTER] Reset
[RETURN]
Return
F
26
1
2
FrontUSB OverLoad detection number display
WLAN power USB OverLoad detection
number display
BluetoothAdaptor OverLoad detection number
display
Press down the Enter key.
Return to the ServiceMenu.
2
3
DM860 software version
uPD78F1166 software version
D810 software version
(In the case of N-30, DSP is not equipped, 0000 is displayed.)
Model identified by the software
MAC Address: The upper [74:5e:1c] is fixed.
IP Address: [0.0.0.0] when not connected to LAN
Reset?
[ENTER]
[RETURN]
Return to the ServiceMenu.
Execute the error count clear.
After the execution, the screen
is returned to the ServiceMenu.
N-50
3
4
Reset
Return
4