Input Input Signal Setting Display; Output Output Signal Setting Display - Mitsubishi Electric CP910E Operation Manual

INPUT Input signal setting display

• Set this menu before memorizing image.
FIELD
NOR(Normal)
REV(Reverse)
AFC(Automatic frequency control)
• The image distortion on the top may occur by the special signal when AFC is set to
"ON". In this case, set it to "OFF."
OFF
ON
AGC(Automatic gain control)
OFF
ON
DCF
OFF
ON
• This function is not available when selecting S-VIDEO.

OUTPUT Output signal setting display

Adjusts red-subcontrast on the monitor. Red is added with ] and
MONI R-SUB
blue is added with [.
Adjusts blue-subcontrast on the monitor. Blue is added with ] and
MONI B-SUB
yellow is added with [.
MEMORY SYNC
EXT
INT
• Selecting external Sync. signal may not display memory image correctly depending
on the connection. In this case, set SYNC to "INT".
The odd and even field lines will be reversed depending on
the input interlaced signal. Printing image is not clear so
that the odd and even field lines may be reversed depend-
ing on the input interlaced signal. In this case, FIELD is set
to "REV." (The image disorder cannot be seen in monitor
display.)
Does not reverse FIELD as remaining the input interlaced
signal.
Reverse the even and odd numbers of FIELD.
The image distortion on the top may occur when the VCR
image is special input such as in pause, field-by-field
playback, or FF playback mode. Also, the image is not
printed correctly because of a weak TV signal. In this case,
set the AFC function to "ON."
AFC is invalid.
AFC is available.
This function is to automatically adjust a dark picture in
brightness and print with sharp contrast. Peak level of an
input signal is detected and signal width is standardized to
the appropriate value.
AGC is invalid.
AGC is available.
This function selects whether separating the composite
video signal or not. When inputting the monochrome signal,
set this function to OFF. The input signal is not through DCF
circuit, so that this function is for high quality of monochrome
image. When inputting the colour composite signal, set this
function to "ON." Input signal is through DCF circuit and the
composite video signal is separated.
When inputting monochrome signal
When inputting colour signal
Selects the Sync. signal for displaying memory image.
Selects external Sync. signal, and displays memory image.
Selects internal Sync. signal, and displays memory image.
INPUT
FIELD NOR/REV
AFC OFF/ON
AGC OFF/ON
DCF OFF/ON
OUTPUT
MONI R-SUB 0
MONI B-SUB 0
MEMORY SYNC EXT/INT
41