Download  Print this page

Print Print Setting Display - Mitsubishi Electric CP910E Operation Manual

Hide thumbs

Advertisement

ADJUSTMENTS & SETTINGS (MAIN MENU)

PRINT Print setting display

APT (Aperture)
Controls apertures and reinforces or softens the contour of image.
S (SOFT)
Softens the contour.
N (NORMAL)
Does not perform APT.
H1 (HARD 1)
Reinforces the contour.
H2 (HARD 2)
Reinforces the contour more.
DIR (Print direction) Selects printing direction. The left and right margin sizes will be
different on L size paper.
NOR
The margin is made on the lower position.
REV
The margin is made on the upper position.
MIRROR
Selects the mirror (left/right inversed) prints.
OFF
Normal print
ON
Mirror print
PRN SPEED (Printing speed)
FAST
High speed printing
(S size : 1280 dots (100mm) x 600 lines (75mm))
NORMAL
Prints lines in double density.
(S size : 1280 dots (100mm) x 1200 lines (75mm))
Only NORMAL is available when using CK900S4P(HX)EU or CK900L4P(HX)EU or
selecting IMAGES : 2S.
ONLY FAST is available when selecting THERMAL : ON.
Examples of SIZE, DIR and MIRROR setting
(This image is limited in printing with white by SIZE setting.)
Standard print
When the values of TOP
and RIGHT are small and
MIRROR is ON
34
Selects the printing speed.
When the values of
TOP and RIGHT are
small
When the values of TOP
When the values of TOP
and RIGHT are small
and RIGHT are small and
and DIR is REV
MIRROR is ON and DIR is
REV
When the values of
BOTTOM and LEFT
are small
PRINT
APT
S/N/H1/H2
DIR
NOR/REV
MIRROR
OFF/ON
PRN SPEED
FAST/NORMAL

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric CP910E

Comments to this Manuals

Symbols: 0
Latest comments: